Recent Posts - Page 51

by AMac, December 6th, 2021, 8:28 am in Espresso Machines
Replies: 4 Views: 148

Where is the magnetic float switch on Profitec Pro 700?

It's in the bottom water tank. Might have gotten a little stuck when you let it dry out. Here is what mine (pro800) looks like. Based on the diagram, it's the exact same on the pro700. 6/7 are the parts in the tank. Pull the water tank, shake it a little and it will probably start working. Diagram: {image} Back...
by Chillodedillo, December 6th, 2021, 8:21 am in Buying Advice
Replies: 6 Views: 357

Which espresso machine under $5000 budget for light & dark roasts

Hey, I'm in big trouble, having my head full of machines but can't decide which one to go with. My drink profile is 75% light roast espressos and 25% medium/dark roast with milk. The machine that I'm working with at the moment is a flair pro 2, but the whole workflow with pre heating every thing isn't the best anymore,...
by IamOiman, December 6th, 2021, 8:12 am in Lever Espresso Machines
Replies: 1 Views: 191

Opinion on ABC "Italcrem / Visacrem" Machine

I know you've purchased this machine from our talks over in the EA discord server, how is it going so far?
by DamianWarS, December 6th, 2021, 7:55 am in Buying Advice
Replies: 10 Views: 337

Alternatives to BPlus shower screen

I'm in Canada too and just made a purchase from Cafune. I think I'm going to get the bplus one from Cafune too but also a cheap one from Amazon to compare the differences. I wouldn't be surprised if you can buy an off brand one of identical quality. I'm trying to source them for a wider use in a...
by JohnB., December 6th, 2021, 7:53 am in Lever Espresso Machines
Replies: 10 Views: 312

CMA grouphead venting

I think it would be far more productive to machine the top of the piston to accept a 4th seal as Bosco does. That way you'd never have to worry about water getting up in the spring area.
by JRising, December 6th, 2021, 7:46 am in Repairs, Restorations & Mods
Replies: 2 Views: 66

Rocket Evolutione Pump Doesn't Stop

Well, a few dozen ideas until we narrow it down. Is it trying to "boiler-fill" but not pumping? Trying to boiler fill but the valve is blocked or closed? If you touch the probe wire to boiler ground, does it stop? What does the pump gauge show? |Does the pump sound normal, quieter than normal or louder than normal? If...
by OK31, December 6th, 2021, 7:46 am in Espresso Machines
Replies: 714 Views: 61361

Breville Dual Boiler Mods and Maintenance

Yup so the leaks persist maybe not as prevalent but... I do now have the new o-rings. So the whole steam circuit you mean including all the hoses to/from boiler as well or just whatever leads to the steam wand?
by jbviau, December 6th, 2021, 7:36 am in Grinders
Replies: 8 Views: 386

Price difference for Comandante C40 manual coffee grinder

^^^ Right, I can recommend STC. Good service. When the MK4 came out in August, I bought one from them. I got it for $299, but I think it was a pricing mistake on their part since that's what the MK3s seem to go for.
by pizzaman383, December 6th, 2021, 7:26 am in Lever Espresso Machines
Replies: 10 Views: 312

CMA grouphead venting

The spring on the LSM group sits higher and more outside the cylinder than the CMA and Condor groups. You would need to modify the group cap while maintaining sufficient structural integrity. It is an expensive and important part to experiment with. It might be doable by a skilled machinist.
by JRising, December 6th, 2021, 7:08 am in Espresso Machines
Replies: 4 Views: 148

Where is the magnetic float switch on Profitec Pro 700?

Yes, it's okay to use it like that with the switch on plumbed. Does the reservoir have a little "boxed off" area in one of the bottom corners? The lid that holds the magnet in the box can be raised or lowered to adjust the floating height of the magnet to make it line up with the switch. The dark...