Recent posts - Page 49
- April 16th, 2024, 6:55 am
- Forum: Buying Advice
- Replies: 10
- Views: 723
Downgrading from Slayer. Options sought.
You need to find a way to make it to a showroom and try the LM machines. The old no burn wand on the GS/3 was truly terrible. The new pro-touch and cool-touch wands are in a class all by themselves. They are full-flow like the burn-me wands, but double layer, so the OD of the wand is quite large
- April 16th, 2024, 6:48 am
- Forum: Buying Advice
- Replies: 25
- Views: 1135
Is Heat Exchanger Temperature Stability Really That Bad?
A great deal. The reason for this is the amount of thermal offset between the boiler and the group. In an HX machine, you have 45-55 degrees of offset between the HX, which is at steam temperature, and the desired brew temperature. As was mentioned earlier in this topic, some manufacturers utilize a reatrictor in the thermosyphon tube(s) (usually
- April 16th, 2024, 6:44 am
- Forum: Coffee Roasting
- Replies: 8
- Views: 189
Dry end time vs. Drying time
This sounds like a weird thing with your Artisan setup that some knowledgeable people here can help you sort out. It should mark at the time you mark it, no subtraction from turning point. Do you have it automatically mark charge (and reset the time to 0:00 at charge) when you put the beans in?
- April 16th, 2024, 6:14 am
- Forum: Espresso Machines
- Replies: 41
- Views: 1801
Understanding Brew Pressure, Flow, Valves, and "Slayer Shots"
This wouldn't work at all, since the brew boiler is saturated. Any time a boiler is completely full, the pressure in that boiler is no linked to temperature, since any thermal expansion at all will take you all the way up to the expansion valve pressure. In this case, a pressurestat would not heat the boiler beyond lukewarm. There
- April 16th, 2024, 6:08 am
- Forum: Repairs, Restorations & Mods
- Replies: 6
- Views: 116
What is this part... Fiorenzato Bricoletta
I've done a little investigating and I see that it is a plug for the solenoid. If I plug it in, the solenoid seems to work properly... but what do the wires that WERE plugged into the solenoid go?! There is a red wire that goes to F4 on the gicar box, a white wire that goes to F2, and
- April 16th, 2024, 5:27 am
- Forum: Buying Advice
- Replies: 10
- Views: 723
Downgrading from Slayer. Options sought.
A slayer is quite a machine to have at home and it is a tough act to follow. It really depends on what u r looking for for your replacement machine though if u r looking at the linea mini, I don't think the tablet touchscreen vibe of the decent is quite the type of machine that would
- April 16th, 2024, 4:17 am
- Forum: Tips and Techniques
- Replies: 2
- Views: 51
Decaf ESE pods 3 ways with Lelit Elizabeth
Thanks for the suggestion. You clearly understand using ESE pods to make the best possible espresso. If I understand correctly though, it would be a long-term, perhaps permanent conversion, at least for me. I still want to grind my non-decaf shots, the vast majority of what I pull. A fairly thorough survey of this admittedly arcane topic showed (I
- April 16th, 2024, 4:13 am
- Forum: Repairs, Restorations & Mods
- Replies: 6
- Views: 101
Breville Dual Boiler Manual Descaling
I would just focus on making good shots with the stock BDB. The slayer mod is nice to experiment with, but you're adding a lot of variables before you have the basics of espresso under control. I did the slayer mod myself, and it's not a magic thing that makes your shots good, at first it might even make your
- April 16th, 2024, 4:02 am
- Forum: Coffee Roasting
- Replies: 136
- Views: 4607
Humidity sensor on exhaust - other gas sensors ?
That is correct. In fact my graphs for 50 and 100g look totally different to my full load 190g batches, not talking about time as the roasting time is similar. Talking about airflow/power, for lower weight batches I use more airflow to push the heat in. With a "full load" in my case 190g (machine can do max 200g but
- April 16th, 2024, 3:33 am
- Forum: Blog
- Replies: 50
- Views: 2736
Mazzer Philos Comments
I can't speak for the youtube versions. The grinders Dan and I received several months ago (I call them Beta versions in the review) had a loud and vibration prone motor noise. This revised grinder has a quiet motor. However, the grinding noises are still fairly high. This is the case with all single dosing grinders used without a lid