Recent posts - Page 3
- 3 hours ago
- Forum: Grinders
- Replies: 6
- Views: 66
Turin/MiiCoffee DF54 Burr Binding Problem?
Oof I'm sure that'd work but that seems risky! "Making adjustments to grind setting while motor is running"
- 4 hours ago
- Forum: Espresso Machines
- Replies: 6
- Views: 117
Breville Dual Boiler gurgling, Brand New machines x 2
From what I can remember of my Oracle (i had to get it repaired numerous times, one being my fault) - that sounds like normal boiler filling of a brand new machine and you've misconstrued it for something faulty. Especially 2 in a row, that's super unlikely. At least try and pull a few coffees
- 4 hours ago
- Forum: Grinders
- Replies: 6
- Views: 66
Turin/MiiCoffee DF54 Burr Binding Problem?
Try adjusting with the motor on whenever you go a lot finer
- 4 hours ago
- Forum: Grinders
- Replies: 6
- Views: 66
Turin/MiiCoffee DF54 Burr Binding Problem?
Out of the box issue with the DF54, unfortunately... When adjusting the grind from 75 to 15 and running the motor it appears that the burrs are 'locked' or 'jammed' and not spinning freely. I can't turn the adjustment collar past 65 at which point the burrs become locked and non-spinning. If I go back up 5-10 in grind
- 4 hours ago
- Forum: Repairs, Restorations & Mods
- Replies: 9
- Views: 236
Rio Lisa Junior
Nice job - pid install looks good but agree that it may not like the heat up there I did a restore on a very similar machine: "Astoria SAE Junior (CMA/Laurentis/RIO) Refurbish Log" The pid is not very useful for this machine since it's a heat exchanger You need to flush the group head before pulling a
- 4 hours ago
- Forum: Coffee Roasting
- Replies: 21
- Views: 696
Highest chance of success - roasters
I've been roasting at home for 20 years - different roasters - not the really expensive ones - though my current original model Behmor is not really cheap, like a modified popcorn roaster would be. They have a few of those poppers at Sweet Maria's - I may give one a try someday. I roast by ear - listening
- 4 hours ago
- Forum: Tips and Techniques
- Replies: 37
- Views: 1050
Latte Art Diagnosis
Interesting, so the push is to make more room for the ripples to come? I always get hearts that are too thick probably because lack of push
- 4 hours ago
- Forum: Lever Espresso Machines
- Replies: 3
- Views: 40
Checking Bezzera Strega P/I and Brew Pressure with Portafilter Pressure Gauge
Thank you for the reply and the info. It is very helpful! Took a look at the manual and I see now that the relief valve is set to 12bar. I see what you mean that the pressure gauge may not be super useful most of the time. I'm thinking it would be most useful if I installed
- 4 hours ago
- Forum: Water
- Replies: 33
- Views: 784
Water, no scale? no corrosion? For reservoir espresso machines
I make my concentrates with baking soda and Epsom salt in RO/DI water. I mix into one-liter bottles and then pour out what I need when I make my one-liter batches of mixed water. My notes say 1.68 g/kg -- Sodium bicarbonate -- NaHCO₃ 2.46 g/kg -- Epsom salts -- MgSO₄*7H₂O Weighing out to 10 mg is
- 5 hours ago
- Forum: Espresso Machines
- Replies: 2
- Views: 40