Recent posts - Page 2

by erik82
1 hour ago
Forum: Grinders
Replies: 2572
Views: 324378

Lagom P64 Flat (Option-O)

And what was the burr issue? If these are 10micron thicker and not seasoned than your at the exact same setting as with the other burrs. Numbers on a grinder have no value when comparing these to others as you're dealing with manufacturing tolerances and seasoning. You only said you where grinding at 0.3 but not where chirp was as
by coldcoffee
1 hour ago
Forum: Grinders
Replies: 2572
Views: 324378

Lagom P64 Flat (Option-O)

Turned out to be a burr issue. Swapped out for new HUs and working very nicely. Pulling in shots at around 2.5 from chirp so have almost a 20 point range to dial in shots. That's what I was expecting
Advertisement
by blondica73
2 hours ago
Forum: Repairs, Restorations & Mods
Replies: 0
Views: 23

La Marzocco Linea Mini steam issues

I've had a Linea Mini for about 5 years and haven't had any major issues with it. However, yesterday morning I noticed that the steam is not as dry as it used to be and it spits out more water than before. My wife also noticed that when the steam boiler is louder when heating up. Any ideas what
by LittleCoffee
3 hours ago
Forum: Repairs, Restorations & Mods
Replies: 0
Views: 20

E61 overpressure during backflushing

I have a well maintained Izzo Duetto IV which is 2 years old and has a flow control kit. I backflush 5x back to back once a week and the same but with detergent once every 3-4 months. Everything works fine - no pressure problems during brewing, excess tray dripping etc. V. happy with machine. I
by luvmy40
3 hours ago
Forum: Repairs, Restorations & Mods
Replies: 9
Views: 229

Breville Dual Boiler - Hissing + Maintenance

Order those o-rings and set a PM schedule to replace them at least every two years. I replace mine on an annual basis
by fabian
3 hours ago
Forum: Espresso Machines
Replies: 0
Views: 9

Breville Barista Express - Machine stopped working after water leak

I'll appreciate your help! I just replaced today the stock OPV with the Vibiemme one according to this guide - {link} I messed something up and when I first connected the 4mm tube, I didn't pull out the metal thing, so it sprayed water when I first turned it on. I fixed it and when I connected the
by luvmy40
3 hours ago
Forum: Buying Advice
Replies: 4
Views: 157

Have owned a La Pavoni Professional for over a year... need decent grinder.

"[FS] Goat Story Arco Combo Electric & Hand Grinder" Here, in the Buy/Sell forum is the best of both worlds. A very capable and consistent hand grinder with an electric dock. Just a bit over your budget, but not by much. I've been using the ARCO hand grinder in my travel kit(I travel a lot!) since it came
by OpenSource
4 hours ago
Forum: Espresso Machines
Replies: 444
Views: 61184

The Meticulous Home Espresso Machine (Kickstarter)

So far I have decided to stay with my humble, simple and noisy bezzera unica! I have got my integrated PID driven boiler and a flow profile extraction. I doubt if the pressure accuracy of the the meticulous will make a notable difference in my so far flat extractions that I use lately Plus I can have an easy
by Paolo
4 hours ago
Forum: Lever Espresso Machines
Replies: 20
Views: 968

Yellow water when emptying La Pavoni Europiccola boiler

Hi Bobsy Do you have an update on the discoloured water cause/source? Cheers, Paolo
by Giampiero
4 hours ago
Forum: Repairs, Restorations & Mods
Replies: 3
Views: 178

SAB 2gr Jolly Auto touchpad issue

Try to verify if all the flowmeters wires are connected properly. In this diagram SLIV is the boiler water level probe, which you have, probably you don't have the SLIVmin, ( minimum level probe) but for you is enough to check how SLIV and the flowmeters are connected. By the way the jumper i previously mentioned is in the right