The flow rate of the brewing water and the hot plate heating (if your model has a hot plate) are different between the half and full pot settings. You only load the reservoir with enough water for a half pot or a full pot. You then choose either the half or full pot setting to start brewing. You do

Looking for a Niche Zero in excellent condition. I am located between Austin and San Antonio, Texas. I will also be in Bentonville, Arkansas for most of May. Would prefer local pickup but for the right deal I would be open to shipping. Let me know if you have one! Thanks all

Why not just cut out the middle man and use your underwear as a coffee filter? Then you don't have to worry about packing filters! Win win

I have also found through discussions here as well as on the decent forum that my grinder as well as many other DF grinders (and potentially other types of grinders) shift in grind settings a bit as the grinder warms up. This can be managed by warming up the grinder a bit before grinding the first dose. Or you can

We use an Aeropress and boil water in a microwave in our own cup

No it's an old used machine. Can I just take it to any electrician?

Maybe you can try this steam wand angle first. {image} You can also try to release the steam until the heating LED on and then close the steam and time it to the LED off. Let's say it is 50 seconds. Before you froth the milk, you can do this again and start frothing milk at 40 or 45

I received a Moccamaster select for Christmas from my wife and kids. My question is about the 1/2 pot versus the whole pot switch. Does it matter? When do you switch from 1/2 to whole? If you pass the halfway mark when do you switch over to full. I only make the amount of coffee that I need and many

How are the V3 with pour over? Have you tried?

Thanks for your reply. I was comparing to one thread here that has quite a few plots "Lever Espresso Machine Flow Profiles" I am trying to mimic the LM leva with slightly longer 9 bar dwell to accelerate the initial flow rate increase But at the same time, I think my flow rate will not be as flat