My Niche is about 1.5 years old and has started drifting coarser while grinding. I tried ptfe tape on the threads as the Wired Gourmet suggested on YouTube, it worked great however the tape was always shredded when I pulled the grinder apart to clean it so I stopped using it.

I...

John Buckman here, the founder of Decent Espresso.

I'll be posting regular Decent news to this Marketplace thread.

I'm also happy to answer questions here. However, there are Decent conversations happening in various places on this forum, among regular forum members, and I'd...

Hi all

Id like to do an experiment with my La Pavoni which requires me to disconnect the p stat entirely.

I saw this video:
In it, he has two configurations:
1. A setup with 2 separate p stats set differently
2. A schematic where the dual switch can select either going...

homebarista.be (Belgium) will launch a 64mm flat burr single dosing grinder in spring this year. It is made in China and SSP-burrs will fit.

Pre-Sales starts next week for 399 EUR.

More information (non-English) can be found here:

It will be interesting to see whether...

Hi all,

I'm getting pretty tired of the long heatup times and the linked brew and steam temperature of my MaraX, so I'm looking to move to a similarly sized dual boiler. I'm pretty limited on width, so that rules out the Breville Dual Boiler (aesthetics aside) and the Lucca...

I've designed a new exit chute for the DF64 to address retention and static issues with the stock grinder. I imagine this may be of interest to readers that either have a 3D SLA printer or know someone that does. There are a lot of makers out there, and I bet most of them drink...

Hey All - Long time since I've been on the boards. My friend gave me an old model Breville dual boiler - the one you cannot manually drain - and there are some issues I'm trying to isolate.

When pulling a shot, the pressure will not ramp. Without a portafilter, the water flow...

Is this a thing?

Note: I'm not speaking about the prewetting without pressure, where you just lift the lever to mid-position without lifting it all the way up beforehand.

It's for an Iberital l'Anna one group. Also I've got a ton of lime scale. Any advice on cleaning it out? I might have to see if I can open up the other side of the boiler so I can get in there.

I'm trying to figure out which side is the top on the new heating element. The blue...

Got the new Linea Mini home just last night after picking it up at Clive Coffee here in Portland. Clive held a nice open house event on Memorial Day where they invited customers down to the store to try out some of the new equipment and check out some of their open box buys....