Out of the box issue with the DF54, unfortunately...

When adjusting the grind from 75 to 15 and running the motor it appears that the burrs are 'locked' or 'jammed' and not spinning freely. I can't turn the adjustment collar past 65 at which point the burrs become locked and...

I broke my back moving this machine, but I am happy to present one of the wildest Faema Uranias I've ever seen; two hydraulic groups and one hotel group (I DO have the glass, it's in shipment still). The entire shipment was 285lb/130kg. It withstood some abuse, but it survived...

Hello,

I've just received my shiny new VBM Domobar Jr Hx Digital. Lovely machine, visually.

Pulled a few shots to get it basically dialed in, so far so good. I wonder, though, how to think about the brew temperature setting. Is this calibrated to the boiler or the group, does...

Hi

I went with this filter based on Pat's recommendation due to my high chloride water
GH 53.7
KH 53.7
Chloride 21

I suspect the hardness is zero and the sodium is high which is why I'm tasting salt in all my shots.

Is there a workaround to this issue? I have the lotus drops...

I have been using the Quickmill Achilles 0996 for over 10 years now, and am looking for a new lever machine.

I was hoping that some of the current Vecis users can help me out with some use case and workflow issues.

90% of the time I pull three shots (split with my wife) and...

If it lives up to the specs it seems pretty cool with room for advanced options in the future. Any takers of the pre-order? Any naysayers have some naysaying to do?

I recently purchased (in New Zealand) a second hand GCP for my sister, it was very cheap but not without problems!

Someone had stripped the screw holding the shower screen in place, which in the end was relatively simple to remove. The main issue though is that the ON OFF...

As suspected by many with the release of the DF64v featuring variable RPM, a version of the DF83 has followed in the DF83v

From 300-1600rpm, verticle burrs with quite a different aesthetic. Should be interesting!

This is the companion to the Philos review thread . Please posts your thoughts here.

I have a Sculptor 078 on the way, and have an unopened never used Fellow Ode w SSPs, outside of a return window. I'm curious if anyone has tried both / has both and if they produce very different cups ?

I'm considering just keeping the Ode as well if I can't resell it for...