Saw these were opened for preorder today, thinking about them as a replacement for the stock burrs in my DF64. Some videos I've seen on the Ditting 804s have me very intrigued!

Table of Contents:
1. Why Lelit Elizabeth?
2. Using the Machine
3. Nice Quality of Life features I'm appreciating as I'm using it more
4. Things I wish were different
5. Misc. Observations.

I've had an Elizabeth for around a month now and hadn't noticed many discussions of it....

I got a new vacuum breaker for my GS3 from a very reputable and knowledgeable espresso dealer. Now, the new breaker (on the top) is actually bigger than the old one (at the bottom).

The installed new breaker sits too high for me to put the metal case back.

As you can see on...

I am interested in trying out some flow and pressure profiling aND As I have owned for many years a double boiler e61 machine with a PID, I was thinking if buying an after market e61 flow control device to have my machine installed with it.

On the other hand there have been...

Hi,

I have been trying to make a simple heart for about 3 weeks now and just can't seem to get the hang of it. My pull through doesn't really pull through very well so the top of the heart ends up with just a little dent at best. I've tried from different heights and varied my...

Just wondering and I don't remember as I've had the machine for like 3 years now. Is it normal for ecm synch to be kinda loud when initially lifting the brew handle. It sounds like a loud rattle my machine is plumbed in currently showing 2 bar maybe 2.5 bar sometimes. I took off...

I wanted to google Compak PK100 but due to a brain glitch, I accidentally found this page:
Seems like Lagom is preparing a new model, yet unannounced, I couldn't find any mention of it anywhere else. 98mm, variable rpm, purge...

// as the page was taken down, here's the...

Just saw Doug and Barb released a leveling puck rake specifically for the Cafelat Robot. Looks like a simple tool that definitely can improve the workflow, whether you WDT or not. Priced well also, given there are so few accessories for the robot (and really so few needed) this...

Hello,
I have two grinders I use with La Pavoni lever machine, the Aergrind and the Comandante (standard axle).
All the rest being equal (coffee, coffe weight 14g, water, water pressure, tamping, lever pressure):
- When using the Aergrind, I need to keep a setting that's...

Bought my VBM DD v3 in 2013 from another forum member who had upgraded. It is plumbed in and paired with a Super Jolly. It sat in hibernation of a sort for the past 2 years: hot water wasn't working and turning on the steam boiler tripped the GFI so I was using it for espresso...