After a few years with my Lelit Bianca, I decided to explore a bit in the area of dripped coffee with the Hario V60. Tempted initially for the Ode gen2 grinder, I finally opted for the manual grinder 1Zpresso sp6 . The grinder should produce very clear cups, described also as...

Hi. I'm about to purchase a wug2 and can't decide on burrs. I drinking black espresso only. Medium roast. 1:1.5 . My current grinder has 64mm SSP HU.

I've read everything I can but I'm interested if anyone has actual experience in both of these burrs for espresso.

I'm pretty...

Good evening everyone!
I would like to buy the new Profitec Drive in a German online shop. I saw that Stoll Espresso also ships to Italy. In your opinion is it a reliable shop? I would like to have some feedback from you. Thank you in advance for your time!

I recently switched to SSP Cast burrs V2 silver and I cannot get decent shot to shot consistency out of . Shots can be 31 seconds and the next one 17 seconds, then 45 seconds. Every else staying the same.

I've read a lot about them before purchasing. I read about those having...

I get Aeropress but, on the road that doesn't generally do it for me. I don't do the ~$8 Starbucks thing either with any frequency but, occasionally hit Tim Hortons and similar shops when traveling in big cities to try the local style! I'm more into cowboy or French Press coffee...

I received a Moccamaster select for Christmas from my wife and kids. My question is about the 1/2 pot versus the whole pot switch. Does it matter? When do you switch from 1/2 to whole? If you pass the halfway mark when do you switch over to full. I only make the amount of coffee...

Looking for a Niche Zero in excellent condition. I am located between Austin and San Antonio, Texas. I will also be in Bentonville, Arkansas for most of May. Would prefer local pickup but for the right deal I would be open to shipping.

Let me know if you have one! Thanks all.

Folks,

I have had a DF83 V2 for about 3 months now and am using the SSP Cast Burrs with it for espresso. Overall pleased with the results. The one super annoying thing is that as I grinder for a few shots in the morning the grinder warms up and the zero will drift...

Hello! I was sent here from Reddit. I purchased a Rancilio Silvia last week. When I turned it on everything seemed to work fine. I flipped all the switches on, pump was work, water came out of the group head but as soon as I opened up the nozzle for steam, it tripped the GFCI...

I currently have a Cremina and I use the one hole steam tip with some success. I found that with the right milk pitcher It can make all the difference but even then it is not easy to get consistent results. Sometimes it makes the perfect micro foam and other times it is globs of...