I'm normally using potassium bicarbonate to make Rpavlis water and recently bought a pack of espom salt. Are there any recommended water recipes for espresso and pour-over that use these two ingredients?

Thanks!

I've read a lot about these two machines and I'm aware that a selling point for the GS3 in home use is the MP conical valve that allows flow profiling, which has its advantages for lighter roasts.

My question is- if your main interest is comfort blend espresso (chocolate nut...

I want to upgrade my roaster and I am asking members for their advice. Artisan 3e or Kaleido M10? Infrared or fluid bed?

I have had a Hottop 2k+ roaster for many years, and I was never happy about it. Even though my BT and RoR curves were OK many times, they never were what I...

Hello!
I am the owner of a Breville Dual Boiler and I would like to know what the pressure gauge should show while pulling a blind shot in order for the pressure at the brew head to be at 115 psi while pulling a shot with a Scace attached. I don't have access to a Scace device...

The short version: I'm currently using a Breville Infuser and hitting its limits, so I'm looking to upgrade to a machine that I can happily use for the foreseeable future.

About me:

I mostly brew light-to-medium roasts, often at a longer extraction ratio with a long...

I have a few days of use on the Eagle One Prima and wanted to share my thoughts and answer the many questions I am getting in one place.

Initial thoughts are:

It has some drawbacks.
1: you have to drill your own hole in the drip tray to set up the drain (stainless drilling is...

Hi all,

I am experiencing a random issue when making espressos and I would love some insights

My setup is:
- good grinder: eureka Specialitá,
- humble espresso machine: Delongui Dedica (I need more space in the kitchen before upgrading it :-))

After dialling in the...

Hi, I'm searching for resources and tips on how to learn/train to recognize and differentiate tastes in espresso. Do you have any tips to share?

Hi everyone,

Thanks for admitting me to this forum.

I've done a little hack that I assume would interest other Linea Mini owners as well. I found it frustrating that the Linea Mini does not come with a temperature display.

Inspired by Williamstown Roasters project on for a...

hi all
i'm trying to restore my rancilio s27, and i would like to swipe the dip tray to plumbed. i just would like to know from the persons who own this machine the exact size of the dip tray in cm ? i'm talking about the stainless steel one not plastic
thanx