I would like to hear from others, your experiences, with the Key.

I consider my renewed interest in espresso truly began in July of 2021 when I purchased a Londinium L1 spring lever on the buy/sell forum. It's a 2014 legacy model that uses boiler pressure for pre-infusion...

I am interested in trying out some flow and pressure profiling AND As I have owned for many years a double boiler e61 machine with a PID, I was thinking if buying an after market e61 flow control device to have my machine installed with it.

On the other hand there have been...

I wanted to google Compak PK100 but due to a brain glitch, I accidentally found this page:
Seems like Lagom is preparing a new model, yet unannounced, I couldn't find any mention of it anywhere else. 98mm, variable rpm, purge...

// as the page was taken down, here's the...

I have an Acaia Lunar and a Brewista, but I would like a cheap extra scale that can get knocked around. Has anyone tried the cheap Acaia copies on AliExpress, like this one

Are there any ones to steer clear of?

Hello,

I just got back my appartamento after a long international relocation.

For some reason the machine turns off exactly at the two minutes mark. It just goes into blinking. It is always at two minutes mark. It maintains pressure in the boiler but doesn't start the pump...

Just wondering and I don't remember as I've had the machine for like 3 years now. Is it normal for ecm synch to be kinda loud when initially lifting the brew handle. It sounds like a loud rattle my machine is plumbed in currently showing 2 bar maybe 2.5 bar sometimes. I took off...

Table of Contents:
1. Why Lelit Elizabeth?
2. Using the Machine
3. Nice Quality of Life features I'm appreciating as I'm using it more
4. Things I wish were different
5. Misc. Observations.

I've had an Elizabeth for around a month now and hadn't noticed many discussions of it....

Hi everyone.
I just bought a used Rocket R58 (2015 model), coming from a HX machine. I grew tired of temperature-surfing.
I have a few questions regarding this machine or dual boilers in general:

1. I couldn't help but installing Eric's thermometer on the e61 just to check how...

Saw these were opened for preorder today, thinking about them as a replacement for the stock burrs in my DF64. Some videos I've seen on the Ditting 804s have me very intrigued!

I got a new vacuum breaker for my GS3 from a very reputable and knowledgeable espresso dealer. Now, the new breaker (on the top) is actually bigger than the old one (at the bottom).

The installed new breaker sits too high for me to put the metal case back.

As you can see on...