If it lives up to the specs it seems pretty cool with room for advanced options in the future. Any takers of the pre-order? Any naysayers have some naysaying to do?

I recently purchased (in New Zealand) a second hand GCP for my sister, it was very cheap but not without problems!

Someone had stripped the screw holding the shower screen in place, which in the end was relatively simple to remove. The main issue though is that the ON OFF...

As suspected by many with the release of the DF64v featuring variable RPM, a version of the DF83 has followed in the DF83v

From 300-1600rpm, verticle burrs with quite a different aesthetic. Should be interesting!

This is the companion to the Philos review thread . Please posts your thoughts here.

I have a Sculptor 078 on the way, and have an unopened never used Fellow Ode w SSPs, outside of a return window. I'm curious if anyone has tried both / has both and if they produce very different cups ?

I'm considering just keeping the Ode as well if I can't resell it for...

I want to know if there is a way to connect the solder points left behind after the timer/dose dial fell off. (I don't use it anyway)
It became detached after mounting screw fell out that held it to the circuit board.
I would appreciate any advice.
Fanks.

i've done a complete renovation of the mushroom/E61 grouphead on a Izzo Alex Duetto 3.
Its really done magic. Only thing is that when i turn the machine on, the brewing pressure seem to go up to around 12 bar.. not that anything happens. But i have to open the lever up and down...

Good morning everyone!
I ask for your help in choosing my next espresso machine. My coffee grinder is a Eureka Specialità which was combined with a Gaggia Evo. My choice was the Profitec Drive, but from what I have read and understood, I would have to empty it continuously due...

Good evening everyone!
I would like to buy the new Profitec Drive in a German online shop. I saw that Stoll Espresso also ships to Italy. In your opinion is it a reliable shop? I would like to have some feedback from you. Thank you in advance for your time!

Hi everyone! I've been using a Yosan roaster for half a year now, and I almost always get tipping on the beans (always on natural processing). I understand the nature of tipping. I've tried changing the batch size from 400-1500g, the loading temperature from 140-210, the drum...