I haven't been able to find any info about this grinder on the forum. Just wondering what everyone thinks. I don't see any details about the motor or the burrs but I kind of like the design/idea

Hello!
Filip here, I'm new here, and new in espresso. Also sorry for bad english, hope you will understand me.

Please help me solve my problem, every espresso shot I pull tastes sour. Not fruity sour, but so sour it hurts when I try to drink it.

I use Gaggia Carezza Deluxe...

I was just doing some work on a new-to-me machine and was reminded how much soft jaws that actually grip but don't scratch chrome or distort bolt threads just make things easier.

These are a Knipex 10 pliers wrench with added semi-hard plastic jaw protectors. The wrench...

I've all but settled on upgrading from my 2007 Gaggia Coffee to a Breville Dual Boiler. They are a bit scarce it seems but I can get a black one direct from Breville I think. On the other hand, I may have an opportunity to pick up a used BDB locally for less than $900.

Never...

Having just received a monolith with SLM burrs, I've realized that my previous V60/Origami target times of 4 minutes or so (with Niche zero) result in over extraction.

What are your target times for dialing in a pour over with similar grinders? Any other tips would be much...

I'm looking to move up in grinders. Presently I have a Baratza Sette 270wI which I find OK. I've always had a desire to try to trade up the Sette to avoid the inevitable demise of the Sette's plastic gears. So I now have a line on a used Mahlkönig K30. I've also been eyeing the...

I got a Kenyan coffee from it through Fellow Drops. It is flat and harsh, not bright. Does not seem like a Kenyan coffee.

Has anyone tried emulating Turkish coffee using an espresso machine?

Crazy-fine grind / low pressure / low flow rate / 3-4 minute 'pull' time, followed by psychotherapy to understand why one would even want to do this.
I'm gonna skip the psychotherapy (lost cause) and...

Just starting a thread to document some modifications I intend to do on my BC-2.

Goals:

- Automate gas control (e.g. push 1.0kpa button in Artisan and gas changes to 1.0kpa)
- Use Artisan software PID for pre-heat and between batch protocols
- Non-invasive changes to the...

I am interested in trying out some flow and pressure profiling AND As I have owned for many years a double boiler e61 machine with a PID, I was thinking if buying an after market e61 flow control device to have my machine installed with it.

On the other hand there have been...