I have an opportunity to buy a used La Cimbali DT1 Junior. It was used on a yacht and form what I was told, well maintained. The owner no longer wanted it, was gifted and then store away for a couple of years. Would something like this be worth 960 dollars?
I would like to own...

Hello,

I've an issue on a Sanremo Capri dual group espresso machine where the hot water tap is leaking from the valve (when I pop the front off the plastic knob water is dripping out there) - this only happens when the valve is in the open position and seems to vary based on...

Dear All,

After going through many HB posts and countless YT videos, finally decided to go for LMLM.
My earlier favourites were Bianca and Profitec 700, but I now prefer the elegance and simplicity of LMLM, though I can't really justify paying a significant premium over a...

Is this a thing?

Note: I'm not speaking about the prewetting without pressure, where you just lift the lever to mid-position without lifting it all the way up beforehand.

After a long time lurking on this forum and being inspired by the very many threads, I took the plunge and decided to make a project out of refurbishing a lever. First a tour of the machine:

This is a 1957 2nd gen Urania - mid generation single group. It has a 1st gen...

Dear all

I would greatly appreciate some comments regarding this particular basket from IMS for my 1965 La Pavoni. Will it fit the stock portafilter?

The outer diameter is listed at 58mm but after measuring my current basket it is about 56mm ish, but with some amount of...

First in-depth discussion we've seen. Like most/all other things Fellow, this looks it'll be a well-designed, elegant product.

I've seen a lot of positive post on this roaster. Where is the best place to purchase it?

Having just received a monolith with SLM burrs, I've realized that my previous V60/Origami target times of 4 minutes or so (with Niche zero) result in over extraction.

What are your target times for dialing in a pour over with similar grinders? Any other tips would be much...

So I recently got the new 2021 Acaia pearl with flow rate indicator, and on my first pour I realized I had been pouring much faster than the Pearl recommends. I think I'd been doing my pour overs closer to 11.5g/sec, and moving to the Pearl's recommended 2.5g-6.5g range was MUCH...