Hey guys,

I have a new issues with my Bianca. I can no longer steam milk to a glossy paint like finish. I have no idea what happened, but I am now getting lots of bubbles and really watery steam. This didn't used to be an issue till about a week ago. Unless I suddenly unlearned...

This thread is for early adopters of the Lelit Bianca

It is also for all who want to comment or Q & A about the ongoing bench review

any advice on where I can buy it in US and or part number?
is it 1200w 120v?

The espresso machine stops heating accidentally. Pump works. The green light is on.
Power on heating element 125v. resistance ~50Mohms. Look like it is dead, I assume it should be less than Kohms.

I am working on a Bezzera BZ07 DE that I purchased used for a friend. It is a beautiful little machine but it is giving me some major headaches. Primarily, I am having a difficult time achieving proper brew pressure. I found and examined the in-line orifice which is located in a...

There's very little information on it here, especially when it comes to comparing with the Ikawa offerings. I hope we can start a discussion and maybe be lucky enough to have Australian users provide feedback on their units. The thread I found here was pretty short.

I'm getting ready to churn out 15 sample roasts of this Private Collection Auction co-sponsored by Anacafe and Alliance for Coffee Excellence.

I'll try to document my experience here and perhaps make for a useful discussion about sample roasting and tasting.

There are some threads and posts that are so exceptional, I've got nothing to say and would like to indicate appreciation. Ryan Lee just completed restoring a Faema Marte. That deserves an Applause emoticon. I don't want to clutter the thread with adding a post to indicate that....

I am close to purchasing the M4 grinder. Any sharing of user experience would be greatly appreciated.

Dear Bianca owners I would like your help and thoughts about this strange issue that bothers me. The timeline is below

At this stage I have tried two thing.

1)I unplug the machine wait for lets say 10 seconds and re-plug it in. Machine starts, displays brew boiler temp...

Hi All

First time poster, thanks for all the help so far with previous questions. i am looking to majorly upgrade my home set up, currently have an 8 year old delongi. I have focused in on the Rocket appartmento originally, but have been pushed towards the Profitec 400 but Ive...