i've done a complete renovation of the mushroom/E61 grouphead on a Izzo Alex Duetto 3.
Its really done magic. Only thing is that when i turn the machine on, the brewing pressure seem to go up to around 12 bar.. not that anything happens. But i have to open the lever up and down...

Is there anyone out there who owns both a Flair 58 and a Cafelat Robot, and can speak the convenience of switching between the two?

I currently own a Flair 58, but I'd be interested in additionally acquiring a Cafelat Robot, as it looks like a fun thing to use.

The main thing...

Hi,

I just got my Weber EG-1 today.
As a first try, I headed to dial in my espresso. I started with locking in my core burrs against each other to get to the absolute zero point. Then I adjusted as the Weber support rep suggested, by changing the grind size 4-6 full numbers...

I received a Moccamaster select for Christmas from my wife and kids. My question is about the 1/2 pot versus the whole pot switch. Does it matter? When do you switch from 1/2 to whole? If you pass the halfway mark when do you switch over to full. I only make the amount of coffee...

After a few years with my Lelit Bianca, I decided to explore a bit in the area of dripped coffee with the Hario V60. Tempted initially for the Ode gen2 grinder, I finally opted for the manual grinder 1Zpresso sp6 . The grinder should produce very clear cups, described also as...

John Buckman here, the founder of Decent Espresso.

I'll be posting regular Decent news to this Marketplace thread.

I'm also happy to answer questions here. However, there are Decent conversations happening in various places on this forum, among regular forum members, and I'd...

Hi everybody - 1st post here!
I read many times about a 5 seconds (approx) delay before coffee flows from the portafilter, but mine appears immediately. My workflow seems to be generally good - I use a Rocket Evoluzione, bottomless portafilter, 18g of ground coffee (dialled in...

Hi. I'm about to purchase a wug2 and can't decide on burrs. I drinking black espresso only. Medium roast. 1:1.5 . My current grinder has 64mm SSP HU.

I've read everything I can but I'm interested if anyone has actual experience in both of these burrs for espresso.

I'm pretty...

Good evening everyone!
I would like to buy the new Profitec Drive in a German online shop. I saw that Stoll Espresso also ships to Italy. In your opinion is it a reliable shop? I would like to have some feedback from you. Thank you in advance for your time!

I recently switched to SSP Cast burrs V2 silver and I cannot get decent shot to shot consistency out of . Shots can be 31 seconds and the next one 17 seconds, then 45 seconds. Every else staying the same.

I've read a lot about them before purchasing. I read about those having...