If you haven't already found parts for the Enrico CE-12 or CE-14, check here: {link}

My 5 year old mini started failing to deliver water recently. Checked and solenoid cleaned by a service business. Unfortunately the problem continued. It turns out if the machine has been on for more than an hour or more - on throwing the switch no click and no water. If I turn it off and let it cool down

To the OP....have you checked out jar and bottle openers? I found some offered on Amazon that might solve your problem

Hi all, I recently purchased a PID Control Retrofit KIT for Rancilio Silvia from Auber. This kit will work on my Faema Family but I'm having difficulty determining where to connect the Auber power supply (VIA SSR). I have been unable to locate a Faema Family wiring schematic. The Faema power button has 4 connections.

This type pliers may work as well. {link}

I would disagree with you when it comes to kafatek's customer service. One example, If you look at the recent post on the kafatek forum, Denis pretty much refunded the person right away who had trouble with their outlet. Denis pretty much stands by his product. From my personal experience he was fast to respond to my email and provided

I can barely even see what you're talking about in either video, definitely not cause for concern. If you take a magnifying glass to ANYTHING, you will find "flaws". I just tested mine, didn't add beans so couldn't see if the ring raises at all when grinding, but when adjusting the grind size back and forth the feeder ring

I might be preaching to the choir but kafatek max2 has been a pleasure to use for espressos. First time being able to taste all the flavor notes, only bad thing about the grinder is that you won't be able to use it 24/7. Build quality is second to none. Denis gives fast response with email and forums. Truly an

I was thinking that a strap wrench would let you determine how long a lever would be needed. I had a similar issue with the knob on my Elektra Micro Casa a Leva, and I was able to use a wrench. Eventually I replaced the sealing washer with a soft o-ring/washer that needs very little effort to seal. However

That's an odd response by Weber. I *think* they think you're referring to the anodized ring that's part of the shaft assembly. I just checked my Mk2 that wasn't cleaned this morning and it does move ever so slightly. But I think that the hopper funnel and bean feeder are a single, connected, assembly so the hole will always move