Recent posts
- 3 minutes ago
- Forum: Grinders
- Replies: 34
- Views: 3443
DF83v vs DF64v (I have both)
Hey, it's been a few month, did you end up returning it or seasoning some more? Did the issue go away/get solved? I'm on the lookout for a new flat burr and both of these grinders are within my price range but I'm a bit put off by posts like this, wanted to see if the issue persists. Thanks!
- 31 minutes ago
- Forum: Lever Espresso Machines
- Replies: 49
- Views: 3188
ACS Vesuvius Evo Leva owner experience
Looking at the left side, I see some small damage to the finish where a side impact from the panel would hit it. I couldn't have caused that, so I don't know what to think. I will, as you suggested, send all of these pictures to ACS (through Maria?) and see what they say. {image} Matt
- 40 minutes ago
- Forum: Buying Advice
- Replies: 6
- Views: 128
Hopper fed grinder
Thanks all. WLL has Ceado e6p on sale. Does anyone have specific knowledge of this grinder versus the others mentioned? 64mm platform is tempting (also super jolly). Thanks
- 40 minutes ago
- Forum: Lever Espresso Machines
- Replies: 49
- Views: 3188
ACS Vesuvius Evo Leva owner experience
Taking the last photo first, that looks like a hexagonal (so it won't rotate) rivnut that was put into the steel with too much force on a misadjusted air tool. I have used the air tool to fit them before and you have to be careful with a different adjustment for thickness of metal and size of rivnut. The Evo
- 42 minutes ago
- Forum: Lever Espresso Machines
- Replies: 49
- Views: 3188
ACS Vesuvius Evo Leva owner experience
taking the last photo first, that looks like a hexagonal (so it won't rotate) rivnut that was put into the steel with too much force on a misadjusted air tool. I have used the air tool to fit them before and you have to be careful with a different adjustment for thickness of metal and size of rivnut. The Evo
- 1 hour ago
- Forum: Lever Espresso Machines
- Replies: 10
- Views: 339
ACS lever safety system
Thank you! I'm looking forward to it. Retrofittable is nice
- 1 hour ago
- Forum: Lever Espresso Machines
- Replies: 69
- Views: 2414
ACS waiting times
I wrote more in the User Experience thread, but DO download the updated user manual from acs-espresso.it before unpacking. It will spare you a lot of guesswork
- 1 hour ago
- Forum: Grinders
- Replies: 20
- Views: 912
Shot inconsistencies with SSP Cast LS
I had the pleasure of fixing the aforementioned DF64 that was aligned at chirp, but not at all aligned elsewhere. The process to evaluate the adjustment collar was to remove the upper carrier and the bolt that holds the lower carrier. I then mounted a test indicator stud in place of the bolt (i have a few M8
- 1 hour ago
- Forum: Lever Espresso Machines
- Replies: 10
- Views: 339
ACS lever safety system
One of the things to remember Matt and I do cover it in a video and in some discussions on my forum. The safety system because of the way it operates does allow 2 types of shots, one starting at a pressure of 9 bar and one starting at a pressure of around 10.5 bar. I have my 1 and