Recent posts
- 6 minutes ago
- Forum: Coffee Brewing
- Replies: 17
- Views: 935
Always brew at 197F?
I have a Brazen brewer so adjusting the precise brew temp is simple. Always do filter and used a Rocky grinder for years. I agreed with your description and had lowered the temp from 204 down to 198 to eliminate undesired flavors. But I recently got a new grinder that is much more consistent than the Rocky and
- 7 minutes ago
- Forum: Repairs, Restorations & Mods
- Replies: 12
- Views: 319
Profitec Pro 800, won't heat after power outage
good question. probably the pump that fills the boiler off the reservoir
- 14 minutes ago
- Forum: Water
- Replies: 5
- Views: 52
Breville Dual Boiler
Pure RO can be corrosive, as in very bad for the machine. Use RO water and follow the rpavlis recipe to get rpavlis water. Or find some bortled water with acceptable values for hardness etc and just use that
- 18 minutes ago
- Forum: Repairs, Restorations & Mods
- Replies: 4
- Views: 124
Izzo Alex Leva pressure relief valve blew. What next?
I experienced the pressure relief valve opening on a few occasions. In my case, the SSR was failing, allowing the machine to overheat. After replacing it, the machine operates normally
- 19 minutes ago
- Forum: Lever Espresso Machines
- Replies: 338
- Views: 39715
Odyssey Argos owner experience
I did just push harder on the lever this morning and got 36ml each time
- 22 minutes ago
- Forum: Tips and Techniques
- Replies: 410
- Views: 23121
Blind shaker better than WDT??
The optimum for me is to grind into the portafilter using a funnel, then take off the funnel and replace it with a dosing cup and shake. For me, no taste difference with less cleanup, and no brushing grounds from blind shaker
- 27 minutes ago
- Forum: Water
- Replies: 5
- Views: 52
Breville Dual Boiler
Jeff are you suggesting just using RO water or use RO water with the rpavlis? Sorry I just want to be clear for myself. Then I guess i need to go find the ingredients and use it if you are suggesting rpavlis. Right now I'm just using RO
- 27 minutes ago
- Forum: Espresso Machines
- Replies: 6
- Views: 92
Help me figure out this model Astoria Argenta - AEP/2N
Yes the pressure stat should just be left at regular steaming pressure 1.5 bar or so It is a heat exchanger machine (please read about this) so by definition the temperature at idle in the heat exchanger will be too hot (at boiling) so you need to do a cooling flush before pulling a shot "HX Love -
- 31 minutes ago
- Forum: Grinders
- Replies: 0
- Views: 1
Any experiences with Mahlkonig VTA 6ST?
Hi, I recently acquired a Mahlkonig vta 6st. It has 120mm brew steel burrs. Does anyone have any experience with this grinder? How would it compare to something like the Lagom P01 - a modern day large flat burr grinder. Thanks
- 37 minutes ago
- Forum: Coffee Roasting
- Replies: 8
- Views: 200
Starting to roast - Greens selection
I still do not believe that any significant amount of CO2 is produced after roasting, only released from the bean structure based on everything I've read. The only thing I can really find that would oxidize releasing CO2 in the presence of air would be the VOCs in the Furan class which is the largest class of VOCs