How is the 200d burr for medium - dark roast espresso ?

Did some more tinkering and bought the Clippard SCPV-1-3 valve and the driver. I modified the existing Arduino code and got it to work. I'll post some pictures and roasts once I dial it in

Well, that make sense, about the boiler. My main problem is with what the gauge is reading... I guess it is usable if the pressure is accurate, but I don't feel like I can trust what it is reading when I is doing the strange paradoxical movements... there is no way that the internal pressure is spiking so high... right?

Have a Quick Mill Monza Deluxe that I started the descale process on using the option in the menu. Unfortunately, it just continues to pump water through. I stopped by turning the power off after filling the reservoir 4 times with water. Now when turning it back on, it wants to start the descale process and I have to select

ChatGPT 4 does a good job: "I removed and cleaned the boiler of my very old Gaggia - 1960/1970. The seal on the lid was a ring of asbestos. It has broken into pieces and can no longer be used. I don't want to use it anyway. My question is which sealing material would be best to use for

Still have my original Pharos and early Lido 2. Just travelled with the latter and enjoyed using it just as much as I did ten years ago when I first got it. I have fond thoughts of D and B and the passion they helped stoke in my coffee hobby. Cheers!

I have not used these baskets, but I think the bottom holes act more like support and won't fully block the mesh. {image} You can test this by using a bottom paper filter in a regular basket. That has proven to improve flow and make for a more even extraction, even though the bottom holes stay the same

Hello, I use to have several micro-sieve baskets, the good thing about them, is that I was able to use a smaller grind, and thus have a a fuller taste in the cup. As far as cleaning it, same as any basket Imho it is very expensive compared to what is gives... Best Nicolas

For this one the camera was actually in my way so I couldn't see my draw through properly {link}

Congratulations. I had the same conversation with DHL today, but they said "check back on the 25th". Today was the expected (ho ho!) delivery date