Recent posts
- less than a minute ago
- Forum: Repairs, Restorations & Mods
- Replies: 0
- Views: 0
Faema Baby Gasket
Hi dear all, I got this beautiful Baby but it does leak water with the current gasket. I tried the one from Francesco didnt work for me at all. I tried the O-ring that was recommended in the previous topics from Danco #100. It does come out when I try to put the portafilter, it doesnt go in fully unfortunately
- 19 minutes ago
- Forum: Tips and Techniques
- Replies: 0
- Views: 2
Green residue after steaming milk.
Greetings from Toronto;) I own a 2005 synesso cyncra first gen 1 group. Machine has gone through somewhat of an overhaul, including a new steam tank. I have observed that after I steam my milk and pour it out the residue left behind is green. I have steamed some water and haven't noticed any green residue. Any thoughts
- 19 minutes ago
- Forum: Lever Espresso Machines
- Replies: 45
- Views: 3130
ACS Vesuvius Evo Leva owner experience
it shares the Vostok mainboard and firmware, the lightbulb is used to turn the group light on/off on the Vostock and on my Evo2, to turn the under machine LED lighting on or off. When I had my first prototype Evo it was built with a 7 year old group and scrap parts, I had to make temp recommendations
- 34 minutes ago
- Forum: Lever Espresso Machines
- Replies: 6
- Views: 268
ACS lever safety system
I don't want to say too much because of copycatting, but he runs the water for a while to partly fill the group. The pump water debit is so fast that even with no portafilter, some water can back up in the bore under the piston. It's why when released, the piston moves initially rapidly in a approx 20 degree
- 44 minutes ago
- Forum: Lever Espresso Machines
- Replies: 68
- Views: 2390
ACS waiting times
I assume you have the safety system, if so the piston and stainless bore sleeve are the original piston. The safety system has a modified piston for technical reasons. It would be good to know exactly how you put the dent in the case to other people don't make the same mistake
- 46 minutes ago
- Forum: Lever Espresso Machines
- Replies: 106
- Views: 12667
Kees van der Westen Spiritello one-group lever
The pre-order price in Taiwan is 499,000 NT$ included VAT. 30% down payment when the order is confirmed. Leva X1 costs 310,000 NT$ for comparison {link} Spiritello is 60% more expensive than Leva X1!
- 1 hour ago
- Forum: Espresso Machines
- Replies: 2248
- Views: 221927
Lelit Bianca User Experience
So I replaced the steam boiler safety valve and now when the machine comes up to temp the seal where I screwed the new valve sputters and hisses. Is there a thread lock type of stuff I should have used on the threading? I'm also pretty sure I could have screwed it in tighter but figured I'd ask here before
- 3 hours ago
- Forum: Lever Espresso Machines
- Replies: 68
- Views: 2390
ACS waiting times
Congratulations!
- 4 hours ago
- Forum: Coffees
- Replies: 5
- Views: 240
Espresso coffee comes out worse than before.
As soon as I can I'll go get some coffees that have the production date printed on the package. I am going to update this debate. Thank you all!
- 5 hours ago
- Forum: Lever Espresso Machines
- Replies: 68
- Views: 2390
ACS waiting times
Congrats on the machine!! How was assembling it? Any advice you would give to have a smooth installation?