Recent posts

by Indica
6 minutes ago
Forum: Marketplace
Replies: 1971
Views: 330393

Custom Wood for your Espresso Machine

Now this is the kind of content that is truly inspirational. Dave, I've sent an email
by yakster
7 minutes ago
Forum: Coffee Roasting
Replies: 19
Views: 395

Any alternative to Behmor?

True, but the alternatives that can roast a full pound have so much better control over the roast with telemetry that it ends up being a worthwhile upgrade for most
Advertisement
by another_jim
9 minutes ago
Forum: Blog
Replies: 52
Views: 3020

Mazzer Philos Comments

The video in the last entry shows how the grind adjustment works. There is a lock at the zero marking (as well as the 145 marking), so it is impossible to make more than one turn on the adjustment wheel. I removed the collar to check for the chirp, and it was approximately at -3. After I changed
by robotuser
13 minutes ago
Forum: Grinders
Replies: 31
Views: 2397

Turin DF83 V2 Drifting Zero

Do DF64v's have this problem?
by Jake_G
13 minutes ago
Forum: Lever Espresso Machines
Replies: 4
Views: 79

1959 Faema Urania Three Group Hydraulic with Hotel Group

Are you sure about that? Looking closely at the plumbing, it looks to me like you have a line pressure inlet fitting at the front of the drip tray surround that feeds a manifold that wraps around the back side of the frame to feed the groups and the valve with a lever on it. Given the other valve
by rmongiovi
22 minutes ago
Forum: Coffee Brewing
Replies: 53
Views: 2971

Fellow Aiden anyone?

And the same could be said of a pourover cone for a lot less money
by GFride
30 minutes ago
Forum: Grinders
Replies: 11
Views: 510

Shot inconsistencies with SSP Cast LS

No I haven't tried
by Cgr86
1 hour ago
Forum: Coffee Brewing
Replies: 53
Views: 2971

Fellow Aiden anyone?

I'd have to think the main advantage is the brewing temps for certain roasts give it the slight edge over a steady temp with the moccamaster if going off of my experience with an espresso machine but I'm not a next level coffee guy so who knows
by Cgr86
1 hour ago
Forum: Coffee Brewing
Replies: 53
Views: 2971

Fellow Aiden anyone?

Don't take this the wrong way but that's saying a lot without saying anything at all
by jfjj
1 hour ago
Forum: Grinders
Replies: 1
Views: 116

Sculptor 078 & Ode SSP - keep both?

you could always keep it and try the difference or slap different burrs in the Ode. I'm curious if the 078 versus SSP MP 64MM still holds up