I had the one from Presta Coffee in Tuscon, AZ and it was similar. Awesome and so fun

I feel like my biggest gripe that has made me trigger shy to buy one is the lack of boiler water level visibility. Then also the process of having to refill it and it runs hot enough to burn you on, what seems to be, a significant amount of the machine. Anyone else feeling like the boiler level

Algerian Coffee Stores if you can handle robusta. Monmouth is OK. They source their own sugar which is pretty unique. Report back if you find anything noteworthy

Consider Beanconqueror. It keeps track of your brews and beans. It also can connect to your scale. You can repeat your brew and the last setting come up and can be modified

I make 3 flat whites every morning. No problem. The Vectis boiler is 1.8 litter so you can't make 8 or 10 drinks without refilling. I can get 5 drinks before I refill

2-year user of an MK1 Key. Love it. But love the upgrades of MK2 and am considering upgrading. I have a BATCH BREW question. If you're grinding 60-80g of coffee at a time, does the bean feeder struggle to feed the beans making it terribly slow? On MK1, I have abandoned the bean feeder

Potentially a rubber foot such as used (or at least used to be used) with electronics gear. One manufacturer and some of their line is {link}

If you are careful with a small saw blade you can cut most of the way through the stuck fitting and smack it with a hammer and punch and it will let go. With a little luck you will be able to chase the threads and be back in business, try it before you buy the tap though... copper is

I briefly used Beanstats, but it seems it's been retired due to cost constraints. Does anyone have a spreadsheet or other tool to track/log coffee beans from an end user (consumer) standpoint? Ideally, a form for entering beans would be nice, but just straight entry is fine. I'm also thinking of a field and sort for bean age

It is a very weird design choice. I might get lucky though and find something in those old-school hardware stores. I've verified the dimensions. It's a non-tapered thin rubber foot measuring 20mm in outer diameter and 18mm in height, with one end nearly capped, leaving a 7mm opening. Despite scouring the internet, the closest match I found was