Recent posts
- 22 minutes ago
- Forum: Buying Advice
- Replies: 53
- Views: 1923
Meaningful upgrade from Lelit Bianca V3
That's super interesting and thanks for sharing! One of the great benefits from participating in a forum like homebarista is that you get to know the thought process and accumulated experience of others. In the past I have played with grinding finer (and not using preinfusion) but results were not as good in general. Admittedly I have not been
- 27 minutes ago
- Forum: Espresso Machines
- Replies: 2
- Views: 39
Help me figure out this model Astoria Argenta - AEP/2N
Hi, thanks for the reply.. Do you know what it is? when I turn towards the plus, the temperature rises, and with it the pressure in the boiler.. do I understand correctly that this changes the temperature, or is it better for me not to touch it ? {image}
- 30 minutes ago
- Forum: Grinders
- Replies: 357
- Views: 33937
New Mazzer grinder announcement - Mazzer Philos
my dealer has a direct contact from Mazzer and he will obtain stock from that contact, is it that it's more difficult for australian dealer to obtain stock from europe ?
- 40 minutes ago
- Forum: Espresso Machines
- Replies: 2
- Views: 39
Help me figure out this model Astoria Argenta - AEP/2N
That's the manual fill valve to fill the boiler The machine is a heat exchange (hx) You run the group and flush water to cool it before pulling a shot
- 55 minutes ago
- Forum: Coffee Brewing
- Replies: 230
- Views: 14699
Next Level Pulsar Brewer
There's always a trade-off between column height and agitation. I'm generally much more concerned about disturbing the brew bed by letting the water column drop too low, so I keep the height between about the 250 to 300 ml mark. Even with the dispersion screen I can see the brew bed being disturbed if the column drops lower than that
- 1 hour ago
- Forum: Repairs, Restorations & Mods
- Replies: 1
- Views: 55
ECM Synchronika will be 4 years old this fall. Any maintanence I should be doing?
I would definitely advise you to displace the water in the steam boiler with fresh water a few times. If scale has been building, it may very well be on the autofill level probe. Use the hot water tap and check if the autofill of the steam boiler works properly. If the probe has scaled up, the steam boiler may
- 2 hours ago
- Forum: Grinders
- Replies: 203
- Views: 26349
Pietro by Fiorenzato - vertical flat-burr manual grinders
The unimodal burrs are amasing for pourover. I tried a couple of different recipes with the Orea and the switch and it is crazy how it is not even close compared to the ZP6. I still have to do a few tests with V60. I assume it is closer there due to the nature of V60. On another
- 3 hours ago
- Forum: Grinders
- Replies: 3
- Views: 200
Kafatek MC6: How to Grind Finer?
Your questions have been answered here, but for future advice you might turn to Kafatek's own forum: {link}
- 4 hours ago
- Forum: Espresso Machines
- Replies: 247
- Views: 17632
La Marzocco Linea Mini R
Thank you!
- 4 hours ago
- Forum: Lever Espresso Machines
- Replies: 436
- Views: 43189
The Londinium R24
I wouldn't bother but the current set comes with sleeve seals. It's just not easy to pull the sleeve out. Mine are finally due at 5.5years, with machine being turned on between 7am and 1-2pm. There's occasional pump bark and I've seen few drops of water at the top of the group, so got myself an extractor tool