Recent posts
- 9 minutes ago
- Forum: Buying Advice
- Replies: 1
- Views: 51
Help purchasing ECM Home, Profitec Go, or Pro 300...
I recommend the Profitec drive, it has the auto on function, so you don't hv to wait for the heat up time
- 42 minutes ago
- Forum: Buying Advice
- Replies: 4
- Views: 152
Reliable German shop online...
Thanks!
- 1 hour ago
- Forum: Coffee Roasting
- Replies: 10
- Views: 334
Yoshan DY-1 tipping
When looking at my Artisan profile or the one shown in the video by Rob Dionne, it can be a challenge because we have similar but not identical roasters to yours. I'm guessing that he has a double walled drum similar to yours. Also, I'm using 100% air from the outset, Rob is using 40%. 40% on his may be
- 1 hour ago
- Forum: Repairs, Restorations & Mods
- Replies: 7
- Views: 77
Cam/lever frozen in place post-servicing
Like the internal components (the spring and such)?
- 1 hour ago
- Forum: Repairs, Restorations & Mods
- Replies: 7
- Views: 77
Cam/lever frozen in place post-servicing
Hey, thank you! I have the shorter one on the bottom, the thicker stemmed (and slightly shorter of the two longer) valve in the middle and the thinner one on top. Fairly certain they are where they need to be, but worth a shot! The update is that after having put the original pieces back in (again), the
- 1 hour ago
- Forum: Knockbox
- Replies: 4
- Views: 230
What are they doing here?
Well then, no need to talk about, 'out gassing'
- 2 hours ago
- Forum: Coffee Brewing
- Replies: 54
- Views: 3002
Fellow Aiden anyone?
The beauty of the moccamaster is its simplicity. It will do the same thing for 20-30 years and parts will be available after that. It's for folks that want a decent cup of coffee with a flick of the switch practically their entire working life. There are plenty of options for more control out there and I'm eager
- 2 hours ago
- Forum: Grinders
- Replies: 2
- Views: 143
Sculptor 078 & Ode SSP - keep both?
I have both. I've had the ode with ssp mp for around 2 years. I got the 078 a few months ago. The 078 is finally seasoned and producing some really great cups. As for taste comparison, it's a bit tough between them. They both edge toward the same type of profile. I end up enjoying the 078 more because
- 2 hours ago
- Forum: Tips and Techniques
- Replies: 15
- Views: 321
Help with spritzers- puck prep
How new is the grinder? 078s hasnt been out too long so if it is newer then it may still need some seasoning. Typically the signs of a youthful burr are inconsistent shots and some spurts
- Yesterday, 11:57 pm
- Forum: Coffee Roasting
- Replies: 10
- Views: 334
Yoshan DY-1 tipping
For your second profile, the charge temp seems right but you seem to be doing a long soak instead of powering up right away. Also if the damper's partly open you're still slowing things down. If you're not driving in enough heat early you may be pushing the roast later. My roaster is probably an earlier version 1 Kg