Recent posts
- 5 minutes ago
- Forum: Buying Advice
- Replies: 6
- Views: 119
Hopper fed grinder
Thanks all. WLL has Ceado e6p on sale. Does anyone have specific knowledge of this grinder versus the others mentioned? 64mm platform is tempting (also super jolly). Thanks
- 5 minutes ago
- Forum: Lever Espresso Machines
- Replies: 48
- Views: 3172
ACS Vesuvius Evo Leva owner experience
Taking the last photo first, that looks like a hexagonal (so it won't rotate) rivnut that was put into the steel with too much force on a misadjusted air tool. I have used the air tool to fit them before and you have to be careful with a different adjustment for thickness of metal and size of rivnut. The Evo
- 6 minutes ago
- Forum: Lever Espresso Machines
- Replies: 48
- Views: 3172
ACS Vesuvius Evo Leva owner experience
taking the last photo first, that looks like a hexagonal (so it won't rotate) rivnut that was put into the steel with too much force on a misadjusted air tool. I have used the air tool to fit them before and you have to be careful with a different adjustment for thickness of metal and size of rivnut. The Evo
- 29 minutes ago
- Forum: Lever Espresso Machines
- Replies: 10
- Views: 330
ACS lever safety system
Thank you! I'm looking forward to it. Retrofittable is nice
- 33 minutes ago
- Forum: Lever Espresso Machines
- Replies: 69
- Views: 2412
ACS waiting times
I wrote more in the User Experience thread, but DO download the updated user manual from acs-espresso.it before unpacking. It will spare you a lot of guesswork
- 33 minutes ago
- Forum: Grinders
- Replies: 20
- Views: 906
Shot inconsistencies with SSP Cast LS
I had the pleasure of fixing the aforementioned DF64 that was aligned at chirp, but not at all aligned elsewhere. The process to evaluate the adjustment collar was to remove the upper carrier and the bolt that holds the lower carrier. I then mounted a test indicator stud in place of the bolt (i have a few M8
- 34 minutes ago
- Forum: Lever Espresso Machines
- Replies: 10
- Views: 330
ACS lever safety system
One of the things to remember Matt and I do cover it in a video and in some discussions on my forum. The safety system because of the way it operates does allow 2 types of shots, one starting at a pressure of 9 bar and one starting at a pressure of around 10.5 bar. I have my 1 and
- 38 minutes ago
- Forum: Lever Espresso Machines
- Replies: 48
- Views: 3172
ACS Vesuvius Evo Leva owner experience
First, some advice: Download the manual from acs-espresso.it before unpacking and setting up. The included paper manual has insufficient instructions. The online version would have saved me some guesswork if I'd read it first. The only caveat there is that DaveC has posted above updated brew and group temperature settings that are different from the ones in the manual. His
- 39 minutes ago
- Forum: Espresso Machines
- Replies: 4
- Views: 62
La Marzocco GS3 Pre-Heater Element Question
Thank you Mr. Jake G, you're very kind. I have been wanting to know this answer for sometime already, sadly no one could actually provide a solid number for me. Btw, 110v country uses a 1000w heating element, 220V(here in Hong Kong) uses a 1200w heating element This is because my Synchronika can hold 1.75bar up for 50 seconds