There's a high probability that you've interchanged the valves. Two of them look the same (but aren't), and there's a shorter one that's obviously different. The short one is the drain valve (bottom most). If you have the short valve where it belongs, then swap the other two and all should be right

Can the cam lever assembly be assembled in the wrong position?

Thanks for the reply. Yes exactly the feeder ring. It moves ever so slightly when adjust the grind size back and forth but I haven't noticed it impacting the cup. I was just eager to hear if anyone else has experienced this issue. According to Weber it's due to coffee grounds being stuck there so I'm gonna clear the inner

Ah, I should have been more clear, but this is my source of confusion. The machine has 5 settings: brew temp in C, brew temp in F, Steam temp in C, Steam temp in F, and steam pressure in Bars. Since steam and brew can be controlled (choose one, obviously) I assume that either they aren't measured at the

That's what I thought . A request to Dave may be in the future. I can just mail him the extra boiler cap

If you wanted something more elegant than a 3D printed lever, Dave "cannonfodder" can probably help you out. Ross can probably help in either case with drawings or at least dimensions. I'd reach out to him in any event. You are probably not the only one who could benefit from the mod

I've not noticed the grind adjustment ring moving up and down, but I have the black color way. If you're not noticing a difference in the cup, I wouldn't be too alarmed as the spring-loaded bearings will keep the ring in place. Regarding the inner ring, are you talking about the bean feeder ring - the part with

There is washing green coffee and also rehydrating green coffee, but my guess is that the pic above is steeping white coffee

It's the turning of the knob. I'm no artist, but I was thinking something like this:{image} I think a strap wrench is a great idea to start with

Can wait to share your process and excitement and to hopefully view a video of it in action pulling a shot! Congrats!