I am currently waiting for my 102mm black 01, Early March Dispatch. I was told they are planning to test Thursday/Friday this week for my order, and if the grinder passes the tests it's ready for shipment

I've thought about purchasing a new tamper several times, but my Quickmill came with a solid tamper, so I've just resisted the temptation all these years

I think I remember someone mentioning they were to shut off the water to the sight glass in case it's broken. Someone who know better will hopefully correct me if I'm wrong

Thank you everyone for sharing your thoughts and experience. I have access to some decent local roasters and they charge $15-$20 for a 12oz bag. Given the wide range of comments, I think I'll start with a cheap option (I already own a heat gun) and see where that gets me

I have an order in for an O1 with 102mm but with the delays I'm considering switching to the 98mm mizen. Has anybody here had a chance to experience the 102 and 98mm for espresso?

what is a good leveling tamper for $50? you are referring to ones with the lip and a 'spring' mechanism? Yeah there are cheaper ones especially on amazon etc but I find they are lightweight and trying to tamp hard enough is painful. a nice heavy 'conventional' tamper, per the post above, is enjoyable to use and only takes

- Chris Baca, on the Dialed Tamper #hks

Well, I pulled the check valve and opened it up. Looked pretty clean, but I cleaned up the little bit of scale in it put a little molykote on the o rings and reassembled it. I wanted to see if it was leaking, so I installed it backward and only to the inlet side, the. Turned the water on. Not

Yes