Thank you for your explanation but I was just wondering if I need to calibrate it to zero before I start using the grinder If it's factory calibrated I don't hv to, I'm a bit OCD, I must complete this procedure before using

Is it possible to get one of you, to show it on a diagram of the machine? Which it's about

I recommend the Profitec drive, it has the auto on function, so you don't hv to wait for the heat up time

Thanks!

When looking at my Artisan profile or the one shown in the video by Rob Dionne, it can be a challenge because we have similar but not identical roasters to yours. I'm guessing that he has a double walled drum similar to yours. Also, I'm using 100% air from the outset, Rob is using 40%. 40% on his may be

Like the internal components (the spring and such)?

Hey, thank you! I have the shorter one on the bottom, the thicker stemmed (and slightly shorter of the two longer) valve in the middle and the thinner one on top. Fairly certain they are where they need to be, but worth a shot! The update is that after having put the original pieces back in (again), the

Well then, no need to talk about, 'out gassing'

The beauty of the moccamaster is its simplicity. It will do the same thing for 20-30 years and parts will be available after that. It's for folks that want a decent cup of coffee with a flick of the switch practically their entire working life. There are plenty of options for more control out there and I'm eager

I have both. I've had the ode with ssp mp for around 2 years. I got the 078 a few months ago. The 078 is finally seasoned and producing some really great cups. As for taste comparison, it's a bit tough between them. They both edge toward the same type of profile. I end up enjoying the 078 more because