So I gave up trying to fix my bes920 and went out and bought a brand new machine today. I must be cursed because this new machine is gurgling too. As soon as you press either the 1 or 2 cup buttons, you hear gurgling for several seconds before a steady flow of water starts coming out fron the brew

Seeing them up close sitting out in the open in the trier scoop under good light gives you a more accurate impression of their color and surface texture compared to watching them behind a thick piece of glass swirling by in a dark drum... At least that's what I think. YMMV

Rotary pumps can be loud too, but a different kind of sound less irritating than a vibe pump. Mine is silent mostly because my pump is done like commercial machines... Which means it is away from the machine, and under the kitchen sink, with the softener. It's also buried by a bunch of junk my wife keeps under there, but

Can you explain what it means to use the finest setting on the Kony? The threaded grind adjustment collar may have a stop screw inserted from the top that is keeping it from going fine enough. If it does, you'll need to loosen that screw and adjust the grinder finer. Cheers! - Jake

Watch the containers on the shelf. Near San Francisco I've found both the "good" and "not so good" sources intermingled on the same shelf. I used CG for a while, then shifted to distilled from Whole Foods at $0.49 / gallon using one-gallon glass jugs with polyseal caps. With 1000 ppm concentrates for GH and KH I can custom mix

I'm so looking forward to it ! Is it way quieter than the version reviewed on YouTube ? Does it stall ?

In Rob's case, I don't think so. He is concerned with inlet temperature not being excessive and manages that with high airflow to distribute heat through the roasting chamber. In my fluid bed roaster, I don't do a maximum load so that the air will freely circulate through the bean mass. With my 1 Kg drum roaster, I have

I know his work and even got that pdf some time ago. I can see someone using 100% air when he roasts a smaller batch size and for my unit too that seems to work better, but if I fill it to max or almost max the lower air setting works better. The reason behind Rob and Rao and

You might also set the air flow at maximum so that roasting temperature is spread through the roasting chamber. That's what I've done with a North TJ-067 1 Kg propane roaster. I start with the highest power setting when the beans are most able to absorb heat and bring it back throughout the roast. I think that Rob Hoos in