Recent posts
- 2 minutes ago
- Forum: Buying Advice
- Replies: 3
- Views: 28
Hopper fed grinder
Probably should stay under $700. I'm not overly concerned about retention unless we're talking about 5+ grams. The first dose in the morning doesn't need to be perfect
- 16 minutes ago
- Forum: Buying Advice
- Replies: 29
- Views: 1302
Is Heat Exchanger Temperature Stability Really That Bad?
I'm very certain that this isn't very challenging or even difficult for a good design engineer with decent tools to analyze the system. It boggles my mind why a truly temperature stable machine isn't available. PIDs and computing isn't expensive these days. IMO controlling temperature of a group that holds enough water for a single shot should
- 22 minutes ago
- Forum: Buying Advice
- Replies: 3
- Views: 28
Hopper fed grinder
2nd hand Mahlkonig K30 Vario might be a reasonable choice. Be aware that most hopper feed grinders will have at least some retention
- 28 minutes ago
- Forum: Buying Advice
- Replies: 15
- Views: 450
Upgrading to a temperature stable espresso machine that can go back-to-back seamlessly.
Is the OP interested in direct plumbing & draining of their machine? How about installing dedicated 120vac & 240vac circuits to service this setup? What about a grinder? Probably a LM Micra might be the next logical step at this point in their travels, providing funds are available
- 38 minutes ago
- Forum: Coffees
- Replies: 4
- Views: 175
Espresso coffee comes out worse than before.
I agree with others, stale coffee is most likely explanation here. Freshly roasted coffee directly from the roaster, whether local or by mail, is 100% a worthwhile investment!
- 42 minutes ago
- Forum: Buying Advice
- Replies: 3
- Views: 28
Hopper fed grinder
Budget range?
- 48 minutes ago
- Forum: Buying Advice
- Replies: 15
- Views: 450
Upgrading to a temperature stable espresso machine that can go back-to-back seamlessly.
Good, it is. Perfectly consistent, it is not. Others have observed this back to back effect with the Zero here. Not saying it is the culprit, just that it is worth checking and confirming first
- 54 minutes ago
- Forum: Buying Advice
- Replies: 15
- Views: 450
Upgrading to a temperature stable espresso machine that can go back-to-back seamlessly.
Niche zero is what I have, I thought it was a good grinder. It has about a 2 minute rest betweent grinds
- 59 minutes ago
- Forum: Knockbox
- Replies: 2
- Views: 134
Are the Weber polymer bean cellars dishwasher safe?
I reached out to support at Weber. Official answer is no to both the tube and the top
- 1 hour ago
- Forum: Espresso Machines
- Replies: 6
- Views: 605
La Marzocco Linea Micra auto standby stopped working
Recieved my Micra yesterday. Pull some espresso yesterday. Set up standby mode and machine will not power on. I've tried the move paddle to dispense and it still wont turn on. Ive tried turning the switch off and on and unplugging it. The app shows the machine is not connected. I can't access the machine via the