Recent posts
- 5 minutes ago
- Forum: Repairs, Restorations & Mods
- Replies: 0
- Views: 0
Rancilio Silvia - Green bits in the steam wand
Hello all; My Rancilio Silvia V1 wasn't steaming very well, so I took off the steam nozzle to clean it and found two small (head of a pin sized or a bit bigger) pieces of light green material inside. Under magnification It looks smooth and uniform so I'm guessing it's man-made and not some exotic form of scale
- 23 minutes ago
- Forum: Marketplace
- Replies: 1971
- Views: 330398
Custom Wood for your Espresso Machine
Now this is the kind of content that is truly inspirational. Dave, I've sent an email
- 24 minutes ago
- Forum: Coffee Roasting
- Replies: 19
- Views: 398
Any alternative to Behmor?
True, but the alternatives that can roast a full pound have so much better control over the roast with telemetry that it ends up being a worthwhile upgrade for most
- 26 minutes ago
- Forum: Blog
- Replies: 52
- Views: 3027
Mazzer Philos Comments
The video in the last entry shows how the grind adjustment works. There is a lock at the zero marking (as well as the 145 marking), so it is impossible to make more than one turn on the adjustment wheel. I removed the collar to check for the chirp, and it was approximately at -3. After I changed
- 30 minutes ago
- Forum: Grinders
- Replies: 31
- Views: 2400
Turin DF83 V2 Drifting Zero
Do DF64v's have this problem?
- 30 minutes ago
- Forum: Lever Espresso Machines
- Replies: 4
- Views: 81
1959 Faema Urania Three Group Hydraulic with Hotel Group
Are you sure about that? Looking closely at the plumbing, it looks to me like you have a line pressure inlet fitting at the front of the drip tray surround that feeds a manifold that wraps around the back side of the frame to feed the groups and the valve with a lever on it. Given the other valve
- 39 minutes ago
- Forum: Coffee Brewing
- Replies: 53
- Views: 2976
Fellow Aiden anyone?
And the same could be said of a pourover cone for a lot less money
- 47 minutes ago
- Forum: Grinders
- Replies: 11
- Views: 510
Shot inconsistencies with SSP Cast LS
No I haven't tried
- 1 hour ago
- Forum: Coffee Brewing
- Replies: 53
- Views: 2976
Fellow Aiden anyone?
I'd have to think the main advantage is the brewing temps for certain roasts give it the slight edge over a steady temp with the moccamaster if going off of my experience with an espresso machine but I'm not a next level coffee guy so who knows
- 1 hour ago
- Forum: Coffee Brewing
- Replies: 53
- Views: 2976
Fellow Aiden anyone?
Don't take this the wrong way but that's saying a lot without saying anything at all