Recent posts
- 2 minutes ago
- Forum: Coffee Roasting
- Replies: 10
- Views: 317
Yoshan DY-1 tipping
When looking at my Artisan profile or the one shown in the video by Rob Dionne, it can be a challenge because we have similar but not identical roasters to yours. Also, I'm using 100% air from the outset, Rob is using 40%. I notice, though, that Rob has a similar ET for charge. Also, he does not open the
- 4 minutes ago
- Forum: Repairs, Restorations & Mods
- Replies: 7
- Views: 66
Cam/lever frozen in place post-servicing
Like the internal components (the spring and such)?
- 8 minutes ago
- Forum: Repairs, Restorations & Mods
- Replies: 7
- Views: 66
Cam/lever frozen in place post-servicing
Hey, thank you! I have the shorter one on the bottom, the thicker stemmed (and slightly shorter of the two longer) valve in the middle and the thinner one on top. Fairly certain they are where they need to be, but worth a shot! The update is that after having put the original pieces back in (again), the
- 40 minutes ago
- Forum: Knockbox
- Replies: 4
- Views: 214
What are they doing here?
Well then, no need to talk about, 'out gassing'
- 49 minutes ago
- Forum: Coffee Brewing
- Replies: 54
- Views: 2992
Fellow Aiden anyone?
The beauty of the moccamaster is its simplicity. It will do the same thing for 20-30 years and parts will be available after that. It's for folks that want a decent cup of coffee with a flick of the switch practically their entire working life. There are plenty of options for more control out there and I'm eager
- 59 minutes ago
- Forum: Grinders
- Replies: 2
- Views: 132
Sculptor 078 & Ode SSP - keep both?
I have both. I've had the ode with ssp mp for around 2 years. I got the 078 a few months ago. The 078 is finally seasoned and producing some really great cups. As for taste comparison, it's a bit tough between them. They both edge toward the same type of profile. I end up enjoying the 078 more because
- 1 hour ago
- Forum: Tips and Techniques
- Replies: 15
- Views: 314
Help with spritzers- puck prep
How new is the grinder? 078s hasnt been out too long so if it is newer then it may still need some seasoning. Typically the signs of a youthful burr are inconsistent shots and some spurts
- Yesterday, 11:57 pm
- Forum: Coffee Roasting
- Replies: 10
- Views: 317
Yoshan DY-1 tipping
For your second profile, the charge temp seems right but you seem to be doing a long soak instead of powering up right away. Also if the damper's partly open you're still slowing things down. If you're not driving in enough heat early you may be pushing the roast later. My roaster is probably an earlier version 1 Kg
- Yesterday, 11:52 pm
- Forum: Repairs, Restorations & Mods
- Replies: 0
- Views: 6
Rancilio Silvia - Green bits in the steam wand
Hello all; My Rancilio Silvia V1 wasn't steaming very well, so I took off the steam nozzle to clean it and found two small (head of a pin sized or a bit bigger) pieces of light green material inside. Under magnification It looks smooth and uniform so I'm guessing it's man-made and not some exotic form of scale
- Yesterday, 11:34 pm
- Forum: Marketplace
- Replies: 1971
- Views: 330414
Custom Wood for your Espresso Machine
Now this is the kind of content that is truly inspirational. Dave, I've sent an email