How long have y'all been waiting?

While I have not performed more advanced methods yet, I do have good understanding of them. My career is in precision manufacturing and inspection, where we measure in microns. Simply wiping off marker only tells you (if you rotate the burr a full rotation) that, at least 1 part of the burr (maybe a high spot) it is

Hello Attached are the sell/spec sheet from "rosito bisani" for the cappuccino del, which seems to be what you have. {image} {image} Looks like they were $1600 about 20yrs ago (thats my writing) Found this thread googling/troubleshooting what appears to be a failed cubic ricerca xp61 touchpad/controller, with my cappuccino del. Prob a

POINT BEING is a considerable amount of money was spent on the grinder in question and has issues new out-of-the-box. NO EXCUSES for that regardless

I am using the IMS B702Th26,5M

Is it worth fixing? If the boiler is split (leaking around the boiler badly enough to rust the bolts) it's possible it was frozen and both the group and boiler will need to be replaced. The fact that it shorts to ground makes me suspect the element, another potential victim of freezing damage. Was it sold as a

Than why are you bashing here without adding anything usefull? You're input is useless for the whole thread. It kind of seems you're a glass half empty guy. sh** happens, things break, production processes have their issues once in a while, that's life. Your opinion can be that difference are small, my real life experience is that it isn't

Oh wow did not expect that The material for the wheel I can understand (plastic creates less static) but the fact that the symbols wear off seem weird when they say that they are "laser-etched"... I'll be sure to comment when it arrives

That's the expansion valve pressure. You do just mean that the pressure in the brew circuit goes up to 12 on the gauge while the machine heats up, right? The machine doesn't actually brew at 12 bar when the brew valve is open and the pump's running, right? It's good that your expansion valve is relieving your brew

That's very useful info, thanks! Maybe I can convince the wife to expand the budget. It could be my quiet grinder for the weekends. She doesn't mind the noisy DF64 during the week, because she needs to get up anyway!