Recent posts

by JordanK
3 minutes ago
Forum: Coffee Brewing
Replies: 27
Views: 838

Mobile or hotel room brewing?

Perfect! And that way you don't have to worry about any brown stains either because you won't know if it's from the coffee or if you had a little accident. Ignorance is bliss. I love how this thread just went from deep paranoia about contracting disease to drinking from shit-stained undies...
by baldheadracing
42 minutes ago
Forum: Coffees
Replies: 1
Views: 49

Moccamaster user

The flow rate of the brewing water and the hot plate heating (if your model has a hot plate) are different between the half and full pot settings. You only load the reservoir with enough water for a half pot or a full pot. You then choose either the half or full pot setting to start brewing. You do
Advertisement
by spicyfood31
Yesterday, 11:35 pm
Forum: Buy/Sell
Replies: 0
Views: 29

[WTB] Niche Zero

Looking for a Niche Zero in excellent condition. I am located between Austin and San Antonio, Texas. I will also be in Bentonville, Arkansas for most of May. Would prefer local pickup but for the right deal I would be open to shipping. Let me know if you have one! Thanks all
by maccompatible
Yesterday, 11:21 pm
Forum: Coffee Brewing
Replies: 27
Views: 838

Mobile or hotel room brewing?

Why not just cut out the middle man and use your underwear as a coffee filter? Then you don't have to worry about packing filters! Win win
by mlunsford27
Yesterday, 11:17 pm
Forum: Grinders
Replies: 30
Views: 2356

Turin DF83 V2 Drifting Zero

I have also found through discussions here as well as on the decent forum that my grinder as well as many other DF grinders (and potentially other types of grinders) shift in grind settings a bit as the grinder warms up. This can be managed by warming up the grinder a bit before grinding the first dose. Or you can
by mkane
Yesterday, 11:04 pm
Forum: Coffee Brewing
Replies: 27
Views: 838

Mobile or hotel room brewing?

We use an Aeropress and boil water in a microwave in our own cup
by Cjames1015
Yesterday, 10:43 pm
Forum: Espresso Machines
Replies: 2
Views: 26

Rancilio Silvia Help

No it's an old used machine. Can I just take it to any electrician?
by bakafish
Yesterday, 10:38 pm
Forum: Lever Espresso Machines
Replies: 7
Views: 300

Steam Tip Dial, Cheap

Maybe you can try this steam wand angle first. {image} You can also try to release the steam until the heating LED on and then close the steam and time it to the LED off. Let's say it is 50 seconds. Before you froth the milk, you can do this again and start frothing milk at 40 or 45
by Chriss60
Yesterday, 10:11 pm
Forum: Coffees
Replies: 1
Views: 49

Moccamaster user

I received a Moccamaster select for Christmas from my wife and kids. My question is about the 1/2 pot versus the whole pot switch. Does it matter? When do you switch from 1/2 to whole? If you pass the halfway mark when do you switch over to full. I only make the amount of coffee that I need and many
by jramey0406
Yesterday, 10:10 pm
Forum: Grinders
Replies: 7
Views: 372

Shot inconsistencies with SSP Cast LS

How are the V3 with pour over? Have you tried?