Recent Posts

by Jeff, 9 minutes ago in Marketplace
Replies: 4 Views: 35

New Jackrabbit Coffee Give-Away

Sounds great! How would you compare your "light" and "medium" levels to other roasters, US or Nordic, that we might be familiar with?
by BaristaBob, 10 minutes ago in Marketplace
Replies: 4 Views: 35

New Jackrabbit Coffee Give-Away

"I'm interested in trying Jacckrabbit" Really! Thanks, Bob
by TomC, 10 minutes ago in Coffee Roasting
Replies: 18 Views: 269

Auto Vacuum Canister (Kickstarter)

It's not helping anything. But temperature and exposure to air/oxygen are vastly worse.
by yakster, 16 minutes ago in Marketplace
Replies: 4 Views: 35

New Jackrabbit Coffee Give-Away

I'm interested in trying Jackrabbit! Thanks for the giveaway!
by BrettShel35, 17 minutes ago in Grinders
Replies: 0 Views: 5

Can You Upgrade Grindmaster 800s with Ditting Burrs?

I've been searching for an answer for this forever, so if anyone could help, please do! I'm looking to do a "Bunnzilla" type mod for my Grindmaster 835 (I believe all of the 800 series have the same burrs except the 890). I'm hoping to fit them with the Ditting 804 Lab Sweet burrs, and potentially using that adapter ring....
by bakafish, 23 minutes ago in Grinders
Replies: 22 Views: 1773

Ultra little grinder?

Yes, but he did not know how to use that air pump, so the pressure is very low.
by r_coffee_newb, 24 minutes ago in Lever Espresso Machines
Replies: 509 Views: 40527

Odyssey Espresso (Argos Lever prototype)

I took a gamble and decided to pre-order this. This will be first "real" machine. I have a Flair Neo and have been having a lot of fun with the manual method, but hoping that this gives me that enjoyment without some of the tedious steps (heating the brew-head, throwing out the water, repeating). I'm guessing I'll need to upgrade...
by braxtonjens, 31 minutes ago in Repairs, Restorations & Mods
Replies: 1 Views: 9

2003 Elektra T1 intermittent pump problems

I'm not an expert on machines, so take this as you will. But I would say that the Gicar/ brain is having issues. Who did you purchase from? Any reputable seller will have good customer support and be able to get the correct parts ordered.
by sweaner, 46 minutes ago in Marketplace
Replies: 4 Views: 35

New Jackrabbit Coffee Give-Away

I'm interested in trying Jackrabbit!
by kalo925, 52 minutes ago in Lever Espresso Machines
Replies: 2 Views: 44

Conti Empress group seals not wide enough

If this is the size you have, you could try the Brugnetti Gasket @ 72 x 56 x 9. The link above says 73.3 x 57.1 x 8mm though.