You might want to compare this profile to those captured using the smart espresso profiler from other spring lever espresso groups

Risky? It's a widely accepted practice that I'd wager nearly everyone on this forum does. I also didn't see anything on the thread you linked about risk to grinding finer while the motor spins

^^^^ Excellent way to do concentrates. The revised Barista Hustle recipes also use this 1000 ppm as CaCO3 strength for both concentrates. Makes it all so easy -- add 20 ml of concentrate to make 1 liter and you have added 20 ppm as CaCO3 to your GH or KH. Note that where these recipes

Oof I'm sure that'd work but that seems risky! "Making adjustments to grind setting while motor is running"

From what I can remember of my Oracle (i had to get it repaired numerous times, one being my fault) - that sounds like normal boiler filling of a brand new machine and you've misconstrued it for something faulty. Especially 2 in a row, that's super unlikely. At least try and pull a few coffees

Try adjusting with the motor on whenever you go a lot finer

Out of the box issue with the DF54, unfortunately... When adjusting the grind from 75 to 15 and running the motor it appears that the burrs are 'locked' or 'jammed' and not spinning freely. I can't turn the adjustment collar past 65 at which point the burrs become locked and non-spinning. If I go back up 5-10 in grind

Nice job - pid install looks good but agree that it may not like the heat up there I did a restore on a very similar machine: "Astoria SAE Junior (CMA/Laurentis/RIO) Refurbish Log" The pid is not very useful for this machine since it's a heat exchanger You need to flush the group head before pulling a

I've been roasting at home for 20 years - different roasters - not the really expensive ones - though my current original model Behmor is not really cheap, like a modified popcorn roaster would be. They have a few of those poppers at Sweet Maria's - I may give one a try someday. I roast by ear - listening

Interesting, so the push is to make more room for the ripples to come? I always get hearts that are too thick probably because lack of push