Recent posts
- 1 minute ago
- Forum: Grinders
- Replies: 27
- Views: 2264
Turin DF83 V2 Drifting Zero
Maybe I missed something. Why are you intentionally heating up your grinder? Not only isn't it a commercial duty machine, but heating up burrs is known to be a problem
- 3 minutes ago
- Forum: Buying Advice
- Replies: 2
- Views: 89
Moving to a flat burr grinder from Sette: what's the best option available in EU right now?
I was looking at the LifeX at the SCA show last week and was impressed by the burrs. Sadly I can tell you nothing about the quality of the grind or the grinder, but the guy in the booth was very passionate about it, far more than the average salesman in most other booths. I guess he had a hand
- 11 minutes ago
- Forum: Espresso Machines
- Replies: 1653
- Views: 166421
La Marzocco Linea Micra
Congratulations! That's a fun color you chose. I suggest that you try turning the steam wand around 180°
- 19 minutes ago
- Forum: Coffee Brewing
- Replies: 48
- Views: 2550
Fellow Aiden anyone?
you're asking the good question. im at the precipice of shifting from the moccamaster to the Aiden as well. the Aiden is definitely more compelling in terms of features. I only hope it lasts as long. then we'll all be winners
- 24 minutes ago
- Forum: Espresso Machines
- Replies: 1378
- Views: 191217
Breville Dual Boiler Mods and Maintenance
Hi Peter, I ended up swapping the o-ring which is actually inside the OPV where you adjust the pressure. It seems to have solved the problem with pressure stability and is now sitting at around 10.5 with the blind disc. The gurgling is still there but has decreased, and is certainly less than the two brand new machines I
- 35 minutes ago
- Forum: Grinders
- Replies: 4
- Views: 213
Shot inconsistencies with SSP Cast LS
What grinder are you using? And how do you know it's well aligned?
- 45 minutes ago
- Forum: Blog
- Replies: 38
- Views: 2201
Mazzer Philos Comments
Because I hv bought a gorilla gear 64 for the philos and is considering selling to a friend, was thinking should I do this
- 57 minutes ago
- Forum: Grinders
- Replies: 23
- Views: 1753
Versalab M4 - truly WDT free?
To really differentiate themselves from the versalab and the titus, the makers of the honne could look into a 98mm flat burr grinding stage rather than 68mm
- 59 minutes ago
- Forum: Grinders
- Replies: 49
- Views: 6295
La Marzocco Swan grinder released
It would also be interesting to know if it is better than the pico which seems to share its approach but has smaller burrs and lacks the ionising ring
- 1 hour ago
- Forum: Espresso Machines
- Replies: 1378
- Views: 191217
Breville Dual Boiler Mods and Maintenance
Well the OPVs are no doubt assembled by hand. It seems not at all out of the realm of possibility that someone got it in crooked and ended up mangling it. It's been a while since I had my original OPV apart. Before I plumbed and switched to a rotary pump, I was using a prosumer brass OPV in my