Recent posts
- less than a minute ago
- Forum: Repairs, Restorations & Mods
- Replies: 6
- Views: 97
Help with Livia 90 Giemme R.L.3 SONDE repair
I heard back from Pat and sent him the Giemme controller. On another note, I will also need a new reservoir, and still trying to figure out how to remove the filter from it? Anybody has a source for it? The one I found at mpespresso costs 70 bucks and if want to include the tab for
- 11 minutes ago
- Forum: Lever Espresso Machines
- Replies: 5
- Views: 227
ACS lever safety system
In hindsight it may be the "sleeve" around the group that needs to be full of water, not the group itself. In the first video above he runs a lot of water through the group before releasing the lever. I am sure that DaveC will confirm at some stage
- 16 minutes ago
- Forum: Tips and Techniques
- Replies: 46
- Views: 1239
Latte Art Diagnosis
Up until the point you reach the middle of the cup, you are doing a great job. Here's a screen shot from one of your videos, and it truly looks great. The pattern is forming in nice wide open leaves. {image} But then moments later the flow becomes too thick and the pattern gets squashed.
- 24 minutes ago
- Forum: Grinders
- Replies: 35
- Views: 5161
Option-O LAGOM Casa Coffee Grinder
Price seems to only slightly more than the Mini, if you take their Instagram clue seriously
- 1 hour ago
- Forum: Lever Espresso Machines
- Replies: 44
- Views: 3086
ACS Vesuvius Evo Leva owner experience
Now that I actually *have* the beast, I have some comments and questions. There is a lightbulb icon next to the on/off button instead of a C/F. I suspect I have some Vostok software in my machine? Th group and brew temperatures were both set to low 90 degree celsius, very far from the manual's recommended 92/101 for brew/group
- 1 hour ago
- Forum: Grinders
- Replies: 35
- Views: 5161
Option-O LAGOM Casa Coffee Grinder
Their website says it's designed for modern light roasts if that helps in any way
- 1 hour ago
- Forum: Lever Espresso Machines
- Replies: 8
- Views: 198
La Peppina drip tray needed
When I had one I looked around too. Mine was fine, but flaking. I thought to maybe get one machined or cut out of brass, then nickel plating it. But seemed much too expensive. One place to try would be ipoktala on instagram. They make other aftermarket parts for the peppina. I bought a tamper and
- 1 hour ago
- Forum: Lever Espresso Machines
- Replies: 5
- Views: 227
ACS lever safety system
That makes sense. I wonder how it is demonstrated in the above videos. I guess the water is running. I'll try it and see
- 1 hour ago
- Forum: Espresso Machines
- Replies: 1394
- Views: 192448
Breville Dual Boiler Mods and Maintenance
- 2 hours ago
- Forum: Espresso Machines
- Replies: 1394
- Views: 192448
Breville Dual Boiler Mods and Maintenance
Hey Pete, I have it little tap and still bubbles, so I removed it to inspect, didn't see anything out of the ordinary? I did post a video of it and the gurgling bubbles travelling through the hoses. {video}{video}The annoying thing is it still produces a great coffee, I just need to preinfuse a little longer until water starts