Recent posts
- 7 minutes ago
- Forum: Repairs, Restorations & Mods
- Replies: 9
- Views: 228
Breville Dual Boiler - Hissing + Maintenance
Will do! Unfortunately, the system arrived with dents/scratches from where they took the top off. I've reached out to them, not sure what they are going to do about it. It sucks because I have very carefully taken care of that system - it is the centerpiece of my coffee bar
- 25 minutes ago
- Forum: Cafes and Get-togethers
- Replies: 4
- Views: 57
Dallas/Ft. Worth area recommendations?
I haven't visited yet but have my eyes on both Merit and Smitten, in Highland Park area. Any recs for either?
- 34 minutes ago
- Forum: Grinders
- Replies: 84
- Views: 10735
Option-O 98mm Mizen Burrs - User Experience
How do the 98/102 Mizen perform for medium roast on espresso? Personally I like modern light roasts but my wife likes medium roasts and milk based drinks. I'm on the search for my end game grinder. I thought I was decided on the EG-1 but after reading this thread it looks like the Mizen on Lagom 01
- 1 hour ago
- Forum: Grinders
- Replies: 2572
- Views: 324364
Lagom P64 Flat (Option-O)
And what was the burr issue? If these are 10micron thicker and not seasoned than your at the exact same setting as with the other burrs. Numbers on a grinder have no value when comparing these to others as you're dealing with manufacturing tolerances and seasoning. You only said you where grinding at 0.3 but not where chirp was as
- 1 hour ago
- Forum: Grinders
- Replies: 2572
- Views: 324364
Lagom P64 Flat (Option-O)
Turned out to be a burr issue. Swapped out for new HUs and working very nicely. Pulling in shots at around 2.5 from chirp so have almost a 20 point range to dial in shots. That's what I was expecting
- 1 hour ago
- Forum: Repairs, Restorations & Mods
- Replies: 0
- Views: 15
La Marzocco Linea Mini steam issues
I've had a Linea Mini for about 5 years and haven't had any major issues with it. However, yesterday morning I noticed that the steam is not as dry as it used to be and it spits out more water than before. My wife also noticed that when the steam boiler is louder when heating up. Any ideas what
- 1 hour ago
- Forum: Repairs, Restorations & Mods
- Replies: 0
- Views: 17
E61 overpressure during backflushing
I have a well maintained Izzo Duetto IV which is 2 years old and has a flow control kit. I backflush 5x back to back once a week and the same but with detergent once every 3-4 months. Everything works fine - no pressure problems during brewing, excess tray dripping etc. V. happy with machine. I
- 1 hour ago
- Forum: Repairs, Restorations & Mods
- Replies: 9
- Views: 228
Breville Dual Boiler - Hissing + Maintenance
Order those o-rings and set a PM schedule to replace them at least every two years. I replace mine on an annual basis
- 2 hours ago
- Forum: Espresso Machines
- Replies: 0
- Views: 9
Breville Barista Express - Machine stopped working after water leak
I'll appreciate your help! I just replaced today the stock OPV with the Vibiemme one according to this guide - {link} I messed something up and when I first connected the 4mm tube, I didn't pull out the metal thing, so it sprayed water when I first turned it on. I fixed it and when I connected the
- 2 hours ago
- Forum: Buying Advice
- Replies: 4
- Views: 154
Have owned a La Pavoni Professional for over a year... need decent grinder.
"[FS] Goat Story Arco Combo Electric & Hand Grinder" Here, in the Buy/Sell forum is the best of both worlds. A very capable and consistent hand grinder with an electric dock. Just a bit over your budget, but not by much. I've been using the ARCO hand grinder in my travel kit(I travel a lot!) since it came