Well, looking at a wiring diagram I found, it looks like they had the correct wires attached to the solenoid... I was able to fill the boiler... but when the contactor kicks on to run the boiler, it trips my GFCI.... I tested what I knew how. Each of the L to T lanes in the contactor are actually open

Thank you both

Could you just buy a set of nice rubber feet and attach them with double-sided tape?

Does this sound like it could be a faulty pump? {video}

The Philos grinder has very distinct clicks. However, the scale goes from 0 to 145; so a lot of clicks. I have no idea what it is like to use a grinder with low vision. But my inexpert suggestion would be to use a different tactile decals at the brew settings, and at the center of the espresso

I just finished a bag of it, myself. Kenya is a bit finicky for me and I really enjoyed this one, but agree that I wasn't getting a pronounced blueberry from it. Deeper and darker fruits, mostly

Thanks! Hopefully I can find a better matching option there

How can a burr be sweet? Keep the question in mind for this review entry. The Philos is delivered with the 200 burr, a burr with no prebreaking section, so similar to the SSP MP and the flat burr of the DRM hybrid. A closer look shows that it is fairly different from the SSP MP, since it has

Good point. I'm grinding for espresso, so much slower

Can anyone confirm what the paddle/valve system was prior to the conical valve which was introduced around 2016? The machines with no pressure gauges on top of the groupheads.... would they have had any feedback?