Recent posts
- less than a minute ago
- Forum: Grinders
- Replies: 29
- Views: 2284
Turin DF83 V2 Drifting Zero
@ Jeff - See OP. This thread is about drifting zero point on DF83. My post is a short term solution to this. Interestingly even Mythos commercial grinder has this issue. {link} A painful read but insightful --- {link}
- 8 minutes ago
- Forum: Coffee Roasting
- Replies: 231
- Views: 23619
Green Coffee Exchange
If you're sending a message, please don't clutter this thread with an announcement "I've sent a message to you." Thanks
- 10 minutes ago
- Forum: Grinders
- Replies: 29
- Views: 2284
Turin DF83 V2 Drifting Zero
never mind
- 23 minutes ago
- Forum: Coffee Brewing
- Replies: 22
- Views: 707
Mobile or hotel room brewing?
None of other things in your hotel room goes into your digestive tract unless you have poor hand hygiene, the problem I think your missing is that there heat resistance bacteria and spores, there some that can handle 120 degrees C bacteria that are found in peoples under garments. Electric kettles aren't made to sterilise meaning you can get potential
- 31 minutes ago
- Forum: Coffee Brewing
- Replies: 23
- Views: 842
Dull, flat flavour with V60 and 1Zpresso SP6
A quick update after putting into practice all the suggestions received. I brewed some Geisha beans, very light roasted (2/5 roast level), and other Ethiopian ones, also light roast. Water temperature 92 *C (197.6 F) soft water, grinding as fine as 3.4 to 3.6 on the SP, following Hoffman's 1 Cup V60 recipe. And indeed the results were
- 50 minutes ago
- Forum: Tips and Techniques
- Replies: 1
- Views: 20
7g VST/LM Single Shot Basket Tips
this is a good read if you haven't seen it already. "What's the best single basket."
- 56 minutes ago
- Forum: Lever Espresso Machines
- Replies: 14
- Views: 364
Olympia Cremina lever questions after group gasket replacement
Thanks! I'll absolutely pick up some fresh beans as you suggest for future efforts, this is encouraging!
- 1 hour ago
- Forum: Grinders
- Replies: 29
- Views: 2284
Turin DF83 V2 Drifting Zero
Maybe I missed something. Why are you intentionally heating up your grinder? Not only isn't it a commercial duty machine, but heating up burrs is known to be a problem
- 1 hour ago
- Forum: Buying Advice
- Replies: 2
- Views: 104
Moving to a flat burr grinder from Sette: what's the best option available in EU right now?
I was looking at the LifeX at the SCA show last week and was impressed by the burrs. Sadly I can tell you nothing about the quality of the grind or the grinder, but the guy in the booth was very passionate about it, far more than the average salesman in most other booths. I guess he had a hand
- 1 hour ago
- Forum: Espresso Machines
- Replies: 1653
- Views: 166439
La Marzocco Linea Micra
Congratulations! That's a fun color you chose. I suggest that you try turning the steam wand around 180°