Recent posts

by Elemsee
2 minutes ago
Forum: Coffees
Replies: 0
Views: 0

Dak natural coffees - brew approaches?

Hi everyone - curious how you've approached Dak (or similarly light roasted) natural / more processed coffees? Typically , my approached with washed coffees is boiling water, medium fine grind, 15:250 ratio, 3 pours including a bloom. Will more processed coffees benefit from an alternate approach, even if they are very lightly roasted? (Ex substantial temp drop
by bman0023
4 minutes ago
Forum: Buying Advice
Replies: 0
Views: 1

VBM Domobar Super or LM Micra

Hi All, I saw the recent review by Dan of the VBM Domobar with the flow profiling and it looks interesting and it looks like there are programs to also flow profile on it that you can set. I would probably opt to program it and profile that way as opposed to the knob profiling way. I
Advertisement
by baldheadracing
6 minutes ago
Forum: Lever Espresso Machines
Replies: 12
Views: 321

(Ab)using the Europiccola to pull coffee instead of espresso

The coffee still has to be packed for cold storage with the same measures and methods used for freezing coffee. In addition, for typical refrigerators, the coffee packaging should benefit from insulating layers (unless you open the fridge door as rarely as you open a chest freezer). One easy way to do this is double-bagging the packaged coffee in a
by bznelson91
12 minutes ago
Forum: Tips and Techniques
Replies: 0
Views: 9

If I wanted to try traditional(ish) espresso...

...which of the grinders on my bench would likely yield the best results? I have: * Lagom P64 with Mizen Omni burrs (still being seasoned) * DF64 Gen 2 with stock stainless steel burrs * 1Zpresso K-Max * 1Zpresso J-Ultra * Kingrinder K2 I'll be using a Decent DE1PRO. I have filter baskets ranging from 18g
by PPapa
19 minutes ago
Forum: Lever Espresso Machines
Replies: 437
Views: 43271

The Londinium R24

So I've pulled the group sleeve and the old seals were looking a bit tired - some flaking, flattened and a bit stiff. The group sleeve extractor tool is highly recommended - I tried to pull the sleeve before and it felt near impossible. With the tool, I could rotate the spanner with a single finger! {image}
by lassepavoni
27 minutes ago
Forum: Lever Espresso Machines
Replies: 12
Views: 321

(Ab)using the Europiccola to pull coffee instead of espresso

I will give it a try. It's about time to get the roaster out of hibernation anytime soon. Still have two unopened bags that my brother gifted to me and might just as well store them in the fridge
by Beobu
31 minutes ago
Forum: Repairs, Restorations & Mods
Replies: 9
Views: 60

Brasilia Club - boiler keep pushing out gasket

Sorry Jake, I don't think so. That brass fitting is just connecting with a nomal brass pipe from pump. The reason I like this machine is all pipe made by brass
by DigitalDoppio
58 minutes ago
Forum: Repairs, Restorations & Mods
Replies: 9
Views: 229

Breville Dual Boiler - Hissing + Maintenance

Will do! Unfortunately, the system arrived with dents/scratches from where they took the top off. I've reached out to them, not sure what they are going to do about it. It sucks because I have very carefully taken care of that system - it is the centerpiece of my coffee bar
by jdrobison
1 hour ago
Forum: Cafes and Get-togethers
Replies: 4
Views: 63

Dallas/Ft. Worth area recommendations?

I haven't visited yet but have my eyes on both Merit and Smitten, in Highland Park area. Any recs for either?
by vebjorn96
1 hour ago
Forum: Grinders
Replies: 84
Views: 10751

Option-O 98mm Mizen Burrs - User Experience

How do the 98/102 Mizen perform for medium roast on espresso? Personally I like modern light roasts but my wife likes medium roasts and milk based drinks. I'm on the search for my end game grinder. I thought I was decided on the EG-1 but after reading this thread it looks like the Mizen on Lagom 01