Recent posts
- 2 minutes ago
- Forum: Grinders
- Replies: 93
- Views: 11911
Option-O 98mm Mizen Burrs - User Experience
I have an order in for an O1 with 102mm but with the delays I'm considering switching to the 98mm mizen. Has anybody here had a chance to experience the 102 and 98mm for espresso?
- 7 minutes ago
- Forum: Buying Advice
- Replies: 2
- Views: 51
Who's still buying conventional tampers?
what is a good leveling tamper for $50? you are referring to ones with the lip and a 'spring' mechanism? Yeah there are cheaper ones especially on amazon etc but I find they are lightweight and trying to tamp hard enough is painful. a nice heavy 'conventional' tamper, per the post above, is enjoyable to use and only takes
- 21 minutes ago
- Forum: Buying Advice
- Replies: 2
- Views: 51
Who's still buying conventional tampers?
- Chris Baca, on the Dialed Tamper #hks
- 32 minutes ago
- Forum: Repairs, Restorations & Mods
- Replies: 4
- Views: 74
Has my brew pressure gauge lost its mind?
Well, I pulled the check valve and opened it up. Looked pretty clean, but I cleaned up the little bit of scale in it put a little molykote on the o rings and reassembled it. I wanted to see if it was leaking, so I installed it backward and only to the inlet side, the. Turned the water on. Not
- 33 minutes ago
- Forum: Grinders
- Replies: 454
- Views: 47145
- 38 minutes ago
- Forum: Espresso Machines
- Replies: 273
- Views: 20595
La Marzocco Linea Mini R
He didn't get something different, base frame is black
- 42 minutes ago
- Forum: Knockbox
- Replies: 3
- Views: 122
The genetic history of modern coffee cultivars
A pretty reasonable summary article has been published at phys.org if you're like me and found the original article a bit of a slog with all the genetics terminology. {link} I think that this article better conveys what a potential breakthrough this research may be
- 55 minutes ago
- Forum: Grinders
- Replies: 3
- Views: 394
Making the last Pharos [VIDEO]
No Josh. This last unit was headed to a collector (not me). The Pharos was the first hand grinder they invented, and I had a version 1, serial 225. It was a breakthrough in grind quality for the cost way back when the one to beat in Jim Schulman's Titan Grinder Project review was the Mazzer Robur, at very
- 1 hour ago
- Forum: Buying Advice
- Replies: 2
- Views: 51
Who's still buying conventional tampers?
I've only picked up this hobby about 5 years ago so maybe I'm missing something but who's buying $175 conventional tampers when you can get really good leveling tampers for under $50. Is it like driving a manual car? It's more enjoyable if you're good at tamping straight?
- 1 hour ago
- Forum: Lever Espresso Machines
- Replies: 0
- Views: 24
How to use vintage faema President 1958
Please let me know if you know more. What are the two knobs on the water level gauge on the right used for? {image}