Read about current and future offerings from the site sponsors.
wachuko
Posts: 1154 Joined: 7 years ago
#1051 :
Post
by wachuko » August 10th, 2017, 5:27 pm
Email sent. I want to have matching knobs and handles for the Rocket...
Searching for that perfect espresso!
Wachuko - LMWDP #654
cannonfodder (original poster)
Team HB
Posts: 10510 Joined: 19 years ago
#1052 :
Post
by cannonfodder (original poster) » August 12th, 2017, 2:51 pm
Bacote wood for a Quick Mill Vetrano. Two portafilter handles and the brew/seam/water control set.
Dave Stephens
Sponsored by iDrinkCoffee - everything you need to brew superb coffee anywhere
LDT
Posts: 242 Joined: 10 years ago
#1053 :
Post
by LDT » August 16th, 2017, 12:05 pm
Dave, sent a PM a few days ago and haven't heard from you. Could you reply? Thanks.
takeshi
Posts: 163 Joined: 17 years ago
#1054 :
Post
by takeshi » August 16th, 2017, 12:49 pm
Custom Wood for your Espresso Machine
cannonfodder wrote: I do not get to PM's very often and being a moderator they fill up fast. My email is in the first post of the thread and a few more throughout the 104 pages.
LDT
Posts: 242 Joined: 10 years ago
#1055 :
Post
by LDT » August 16th, 2017, 3:33 pm
Thanks Don, that helps.
cannonfodder (original poster)
Team HB
Posts: 10510 Joined: 19 years ago
#1056 :
Post
by cannonfodder (original poster) » August 20th, 2017, 8:14 pm
One little Bacote portafilter handle.
Dave Stephens
jerbear00
Posts: 352 Joined: 11 years ago
#1057 :
Post
by jerbear00 » August 26th, 2017, 2:01 pm
Wow that bacote is beautiful!
Sponsored by iDrinkCoffee - everything you need to brew superb coffee anywhere
cannonfodder (original poster)
Team HB
Posts: 10510 Joined: 19 years ago
#1058 :
Post
by cannonfodder (original poster) » August 27th, 2017, 8:23 pm
Been busy doing some charity work. Milling 100 plaques for my local summer camp's 50th anniversary and working on getting a LaSpaziale side panel in CAD for the CNC.
Dave Stephens
cannonfodder (original poster)
Team HB
Posts: 10510 Joined: 19 years ago
#1059 :
Post
by cannonfodder (original poster) » September 7th, 2017, 11:46 am
Cocobolo for a Lelit Mara espresso machine.
Dave Stephens
cannonfodder (original poster)
Team HB
Posts: 10510 Joined: 19 years ago
#1060 :
Post
by cannonfodder (original poster) » September 7th, 2017, 6:58 pm
Finally got the LaSpat side panel drawn up. Still have to add the profile, this is just a flat 2-D
Dave Stephens