Reassemble Quickmill Alexia OPV?

Need help with equipment usage or want to share your latest discovery?
Post Reply
Philg
Supporter ♡
Posts: 197
Joined: 17 years ago

#1: Post by Philg »

Hello,

After an adjustment I noticed a small puddle under my machine and impetuously took my OPV out and apart, I found a small part that I assume goes in there but I'm not sure. Is this (photo) the correct way to reassemble? Any hints how many turns from closed to get around 8 -9 bar?

Thanks,
Phil

Top
kize
Posts: 271
Joined: 13 years ago

#2: Post by kize »

There is a thread here
Spooky brew pressure

Shows a pretty good picture. Looks like yours is correct.
Top

Sponsored by iDrinkCoffee - everything you need to brew superb coffee anywhere
Philg (original poster)
Supporter ♡
Posts: 197
Joined: 17 years ago

#3: Post by Philg (original poster) »

Thanks Kize.
Top
Philg (original poster)
Supporter ♡
Posts: 197
Joined: 17 years ago

#4: Post by Philg (original poster) »

Follow-up question - reassembled OPV dripped and sent boiling water and steam shooting (noisy and seemed like substantial volume - I shut right down) into reservoir - any ideas about what I might have done wrong?

Thanks.
Top
Philg (original poster)
Supporter ♡
Posts: 197
Joined: 17 years ago

#5: Post by Philg (original poster) »

Reseated the seat - seems to be working.
Top
Post Reply
Advertisement