Below is a collection of this forum's most popular topics. To nominate a thread for inclusion in this list, please post a reply to this message. Remember to check the Resources page for other references.
Hi folks,
I've got a new linea mini a few days ago. I noticed that the water out of the machine smells a bit plastic-y. I can't notice it in my espresso only if I drain some water from the group head and smell the water.
I've had my Lelit Bianca for about a year. It's been working great, until yesterday...
I have it set up on a Wemo and yesterday morning my machine wasn't on- (20A) circuit had tripped.
Turned the circuit back on, fired the machine back on- PID showed the Lelit logo and the...
I'm new to the forum. New to the espresso machine.
My Breville Barista Pro came in yesterday. Read the manual. Did everything suggested, and some more. Finally got to a point, I'm getting espresso close to how I like it.
Here are the settings:
Top burr: 3
Grinder: 14
Bean: 18...
My frustration brought me here because even after having watched dozens of tutorial videos about how to get a decent espresso out of the Sage Barista Espress (Breville), I cannot seem to make it happen...
I'm using the singe wall filter basket, 18 grams dose...
Received a Profitec Pro 600 for Christmas and enjoying starting to play with it (very new to all this!).
Have a question about the steam wand - is it meant to be pretty loose (especially when the machine is heated) so that slight pressure on it when steaming causes it...
Looks like Lelit is introducing an HX that addresses the usability of HX machines in the area of brew water temperature control. However I only see a low, med, high setting which would mean nothing to me. I couldn't understand how their control system works.
What has your experience been with puck screens? Do you use them? Do you like the results? Do you find that they change the taste and the mouth feel of your coffee, for better or worse?
My 5 yo ECM synchronika stops heating in the middle of steaming. I replaced magnetic sensor and the floater is in the right position and clean. It is working ok for one or two cups of latte and then stops heating. It also becomes very prone to the same problem if it stayed on...
Before I jump into the central topic, I just wanna thank the HB community for the past several years as I've been an avid lurker soaking up all the info. :lol: Especially during the time we were locked down as it inspired me to do something coffee related instead of watching the...
