Before posting to the Buy/Sell forum, please review the rules below. By accessing this forum, you agree to these rules in addition to the site's Terms of use . If you do not agree with these terms, please do not access the Buy/Sell forum.
For sale is the beautiful Strietman CT1 Lever machine. This machine is working flawlessly and is a pleasure to use. It's in great condition with only very superficial scratches to be seen on close inspection. I even polished it up for the next owner. The only modifications I...
Hope everybody is staying safe. I have up for sale my Feb 2019 Monolith Flat with SSP burrs with all black parts as well as walnut cap. Comes with all stock stuff as well. Machine is flawless aesthetically and functionally and has been well taken care of. Will ship...
For sale is a Mazzer Super Jolly Electronic in matte black color.
I am the first owner, it has been lightly used at my home for the past three years, and has been upgraded with SSP espresso burrs shortly after purchase. The grinder has 2022 shots on the counter, approximately...
Hey all,
Looking to upgrade my set-up but need to sell off the current team first. Really don't want to deal with shipping right now, so pick-up/drop-off in the Portland, Oregon area preferred.
Rancilio Silvia Espresso Machine for sale - purchased in 2013 from Seattle Coffee...
Looking for the self-leveling (v2) tamper. I see the slight blemish version is selling for 75$ on their site, but unfortunately they're sold out right now.
I am selling my Monolith Max grinder. Grinder is in mint conditions and has had approximately 10 pounds run through it. Grinder will ship in the original packaging and include the following accessories: Unused dosing funnel, RDT sprayer, Kafatek sticker, and Wenge wood cap that...
Selling my Silenzio, in Great working conditions, chrome plate with black overlay, please see picture. The grinder was bought in Dec 2019 from 1st line equipment and has been use twice a day (36grams). Reason for selling is recently wife bought me a NZ. Will ship in original...
Hi there, up for sale is a Cafelat Robot. One of the arms does have scratches and scuffs on it, which I have tried to highlight in the pictures. It originally had the pressure gauge attachment (not included) and I wanted to remove it. However both set screws were stripped and I...
Hi there, up for sale is a Niche Zero (Black) in very good condition. I would estimate ~50 lbs of beans have been run through it, so the burrs should be fully broken in.
When I examined the machine, I did notice some light scuffing just under the chute due to inserting the...
I'm selling my blacked out Monolith Flat (110V) from January 2018. It originally came with the standard 75 mm burrs, but I upgraded to Red Speed SSP burrs in 2019. I'm sending both sets of burrs with the grinder.
I estimate I have run about 60 pounds of beans through the...
Selling my Specialitá, in A+ working order and perfect looks besides a scratch in the back of the chrome plate that you can see in the picture. The grinder was bought in October 2019 and has seen very little use since I have two monoliths, I estimate it has seen no more than...
Today for trade (or sale if there is a decent offer of $1000 cash plus shipping) I have a Lucca A53 Mini. This machine is a very enjoyable double boiler that has been lots of fun to play with. This can be used in a home situation, like it has its whole life, or...
This is the kit used to add a pressure readout to the Cafelat Robot. Includes one extra tube. I don't have the nylon shim (small rectangular piece of plastic that you screw the set screws into), but you can probably find something similar around the house or use the cut up piece...
I have a ~ 3 year old Gaggia classic free to whoever wants it. This machine is complete and was my Mom's. It recently stopped working - no power when plugged in. It's likely a burned out thermal fuse. This is a cheap part and an easy fix - I've already replaced it twice on this...
Selling my SAI Tamper after a few months of use. Its a great palm tamper, in excellent condition. Comes in original box and looks new. Really enjoyed using this tamper but I was able to get a Kafatek LevTamp which suits my routine a...
Hi, I'm looking to buy a walnut cap, SSP burrs, and a black top case (I'd swap for red if you like..) for my Monolith flat. These upgrades are sold out at the Kafatek store. Let me know if you have any of these.
I am selling my SAI New Levy Tamper (53.5mm size - retail price of $149) which fits the Breville 54mm portafilter quite well and is a vast improvement over the Breville tamper. I am selling this for $70 (retail price is $149). There is a slight cosmetic scratch on the side, but...
I am selling my 58mm SAI New Levy Tamper for $99 (retail price is $149). I received this as part of a Clive promotion when I purchased my machine late last year. However, I managed to purchase a KafaTek LevTamp and so it now sits in the box after a few weeks of use. It's a great...
Mazzer Mini (doser)
Original owner
Purchased May 2006 from Whole Latte Love
Approx. 8 years of use. In storage since May 2014
Includes:
Original packaging and documentation
New, unopened OEM replacement burr set
Very good condition. The grounds tray has one attachment tab broken...
Rancilio Silvia V3
Original owner
Purchased June 2015 from Seattle Coffee Gear
Less than 6 months use
Was used temporarily during a move and while my LS VII was being serviced
Auber PID KIT-RSRTDN V2.2 installed (controls brew temp. only)
Excellent condition, functions...
Through some dumb luck, I was able to pickup my grail grinder from another forum member: an all-blacked out 2020 Flat with SSPs. As a result, I'm selling the one that it replaced:
Monolith Flat
-Serial #110, Sept 2019 Machine
-Voltage 110V
-SSP Red Speed Burrs
-Black Top Plate...
Looking to sell my White Niche Zero. The grinder is about 6 months old, maybe 15-20lbs through it. I bought this to tide me over waiting on delivery of a Monolith.
Given the COVID-19 situation, for now, I'm only offering this for a local, socially distant pickup. I'm not...
Hey everyone. Putting my K30 Vario Air up as may need the funds for something else.
2014 Vario Air for sale
Good condition, just replaced the burrs (they've seen less than 5lbs) and aligned. Machine has seen 5k single shots and 49k double shots total. Mahlkönig recomends a...
Kafatec Monolith Flat 80mm Compak Burrs (they will no longer sell), exact as shown in photo, will come shipped in its original box w foam packing Fedex Sig required- you will get tracking immediately. Has a couple spots in black powder coat where I have touched up w a black pen,...
Expobar Pulser. I purchased this new from Whole Latte Love I believe in 2007 and had used it nearly daily. The only maintenance needed has been a new pressurestat and grouphead gasket...until now.
It started misbehaving. The pump ran for an unusually long time on start-up...
I bought my Quick Mill Andreja Premium from Chris' in 2011. It's been great -- but thinking about moving up to a double boiler with PID. I make 2 lattes every weekday and more on the weekend, and it pulls consistent shots. It's never been moved from my counter, so it's in...
I have a brand new Monolith Max (110v), received on Friday. Less than 10 pounds through it.
I am selling for the price I paid, which is $3,690.00. I will only accept PayPal. I will cover shipping (to the US 50 contiguous states) and paypal fees. Not looking to haggle, the...
I'm selling my <1 month old old Rocket Mozzafiato Evo R Timer (Cronometer) to help fund a Lelit Bianca, as I'm curious to play around with flow profiling, and my wife likes the aesthetic better.
I purchased the machine from EspressoCoffeeShop in Italy and took delivery on...
I have a like new, without plastic inner propeller, Gicar flow meter. Purchased new from Clive thinking it would fix a problem with an old S1 I had. These are around $85 new, no water ran through it, I just plugged in and when it didn't fix the issue, I put the old one...
Purchased September 2018 and mint condition (Serial # 253). Home use and soft water (50PPM) used at all times. Properly cleaned with Cafiza every 1-2 weeks. Pulled 2-4 shots per day.
Comes with suitcase and original packaging plus the following:
For sale is a Monolith Flat #1070, delivered in Feb. 2020. I estimate I have run about 10-15 lbs of beans through this grinder so it is getting closer to being seasoned.
This Flat comes with SSP Red Speed burrs, walnut and wenge caps, and the standard...
Selling a BPlus Apollo Grinder in grape champagne. It is in very good condition. There are some signs of wear on the top of the catch cup where it mates to the grinder body, that is unavoidable. The grinder works beautifully, but I do not use hand grinders too much these days so...
Hey, I'm looking for a little help from my fellow Robot enthusiasts. My piston seal is toast. I ordered a new set of seals, but they have been stuck in Hong Kong since 3/28. Apparently the current health crisis is holding up a lot of shipments.
Up for your consideration is a 2014 HG One Grinder with original steel burrs . This has a custom made magnetic basket holder with funnel. The magnet makes it easy to center the basket under the burrs and the funnel directs the grinds right into the basket. This was expertly...
Free for pickup in Denver. I bought this machine second hand a year or two ago. It fell off of a work bench breaking the side panels. It does work otherwise, but I was never too impressed with it. If anyone wants it for parts, it's all yours! What you see is what you get.
Monolith Flat (pictures at bottom)
-August 2018 bid period
-Current adjustment scheme, (not the older thumb screw)
-SSP Red Speed burrs
-Offered at base price plus cost of options, (but with Added value bonus )
-Buyer pays actual shipping cost (I get a good deal on FedEx, but...
My buddy is looking to sell his white Niche Zero, so I offered to help facilitate. It's only a few months old and has been very well taken care of. He loves it, but is looking for a different aesthetic for his kitchen.
He is looking to get $600 (Sold) net. It can be picked up...
I'm looking for the following La Peppina parts, if you have any you want to move please let me know. I'd also be interested in a partial or complete parts machine, maybe even a working model!?!?
I've upgraded my grinder and only have counter space for one! Purchased this directly from Baratza in October 2019 and still under the 1 year factory warranty until October 2020. Has the latest electronics and firmware installed.
Have a Decent Espresso Tamper v2 for sale. Purchased this a few months ago, and have used it probably no more than a dozen times. Perfect functioning and excellent cosmetic condition, as pictured.
Sells for $109 + shipping from Decent directly. Selling for $75 + shipping to...
For sale is a first gen Flair Signature Pro. The unit has the first revision of the stem. The original stem can also be included, though this stem design was recalled. This doesn't include the carrying case or pre-heating cap; only the parts shown and a shower screen are...
