Before posting to the Buy/Sell forum, please review the rules below. By accessing this forum, you agree to these rules in addition to the site's Terms of use . If you do not agree with these terms, please do not access the Buy/Sell forum.
For helpful packing tips, see Seattle Coffee Gear's video How to Package an Espresso Machine for Shipping . As noted in the Buy/Sell Read before posting! announcement, as a matter of policy, moderators will not become involved in any disputes between sellers and buyers. A little...
Late 2018 GS3 MP had little use. Comes with portafilters, tamper, baskets and everything to hook up to mains as per original. Also comes with bottomless la Marzocco portafilter.
Used with filtered and distilled water only. Gasket changed recently for a silicone one and recently...
2003 Conti Classica 2 Group Lever Machine. This is my machine, I personally undertook this project last spring. Machine has been completely tore down, and rebuilt. Every gasket and o ring replaced. Everything works, no leaks, lots of new parts. Willing to meet in the middle for...
I have a second gen La Pavoni base that I had powder coated in a deep red. It had some rust that was removed and properly prepped (media blasted) before applying the powder coat. There are some ridges on the underside from the rust if you look close enough. I have too many...
I just had this machine thoroughly examined by Chris coffee .
They replaced the main board CPU unit, some fittings and steam wand gasket, gave it a once-over to be like new.
I bought this from Chris coffee new about 7 years ago and has served me well.
I have a Weber Key Grinder in Onyx that I got a few months ago with the Magic tumbler, but only used it a handful of times. I just have too many grinders and not super interested in it. It was one of those impulse pre-orders and I paid for expedited shipping to get it quicker....
Hello,
I'm selling my barely used like new Mahlkonig E80 Supreme espresso grinder. It has the 80 mm flat burr same as the peak and the Ditting 807 Lab Sweet. If you know anything about this grinder you know that it's the one almost every coffee shop uses. I also have the...
Since my new lever will be in soon I've decided to sell my La Pavoni Europiccola Post Mill. The lever is in great shape! Freshly descaled and fully upgraded. I am asking $800 plus actual shipping or pickup near Boston ma
Upgrades include:
Coffee Sensor PPK kit for pressure...
I found this machine in 2019 and posted about it here: A new 1981 Elektra Microcasa a Leva I'm reusing the pictures because it's been unused since 2019.
I recently bought Russell's Club on this forum and feel this sweet machine needs a home. The condition of this machine is...
I'm looking for a Lagom P64 (silver or black) with whatever burr set.
I am near NYC and sometimes go to Bay Area for travel so it'd be good to have a local pickup there.
So, you tried it and decided to go a different direction...
I'm looking to give the pourover burr a test drive to see if it will work for me. If you have one that's sitting in your drawer send me a PM, and lets put a deal together!
I originally bought this in 2017 from WLL and has worked flawlessly especially after the SSP burr install last year. Replaced with a Lagom P64 as I wanted one grinder for espresso /v60
Listed at $900 via paypal. Local pickup preferred but will ship if buyer arranges it. I'm in...
Up for sale is a Mahlkonig K30 Vario Grinder in perfect condition. This grinder has been used exclusively for home use and is cleaned up and ready for its next home. I got my hands on a Flat and am unloading all my other grinders.
The grinder has always run perfectly and has no...
White La Marzocco Linea Mini purchased in January 2018 from Chris Coffee. Rarely used, approximately one/two shots per month and in immaculate condition and completely unmodified. I have EVERYTHING that came with it originally...all manuals, tags, boxes and etc. Literally...
I am selling my Nuova Simonelli Oscar ll, I bought the machine in late 2021 and used about 5 days a week until mid April then used 1-3 times a week. Like new condition and has been cleaned regularly with cafiza. Will be shipped in big box with original box inside (Double boxed)....
BLUF: New in crate Coffeetech FZ94 roaster for $10,500 picked up in Boulder.
About three years ago as I contemplated retirement, I went through a phase of I want to be a master roaster . I took classes at Mill City in Minneapolis and purchased a series of ever more expensive...
I'm selling my 6 month old Baratza Encore. Works perfectly with my Rocket Appartamento. I was seduced into a Niche Zero. Not enough room on the counter for both.
Works perfectly. Looks even better.
I'm asking $100, and you can pickup (Santa Rosa, California), or I'll...
We are doing a coffee shoot in Chicago, and need some props. I currently live in Seattle, but can't lug my coffee toys with me at least not all of them. Here are things I am looking and happy to pick up/drop off and also pay for the rental cost for whole day. We will...
I'm selling my Rocket Faustino grinder that I bought from Seattle Coffee Gear in 2/2021. Upgrading to an atom 75 so no longer need it. I grind for a double shot everyday so the burr has seen about ~26 lbs of coffee through it. Asking for $470 shipped CONUS only, or local pick up...
Interested in a Olympia Cremina . or a Olympia Maximatic will consider a Pasquini Livietta (Olympia Maximatic)
why let it sit there not wanted or cared for.
Mocha grinder also needed.
Selling a sale Decent portafilter stand. This was bought from their sale website, and as anyone knows that shipping is crazy from them. Selling for $20 local pick up in the Bay Area. It is for a double spouted portafilter so it does sit higher but can accommodate the bottomless....
Selling my monolith flat. This is from the 2017 run. The grinder uses 75mm mythos burrs. Capable of running SSP (not included but pictured to show) and the new Shuriken burrs as well. The mythos burrs have minor wear on the tin but this has no effect on grind. The grinder is in...
I tried to get myself to let go of this before and just couldn't do it, but I'm going to take another shot at it because I'm really trying to cut down this time, for real. This is a Gen 1 Cyncra that was converted to 110v for me by Synesso. It's physically a monster of a...
This is one of my last project machines. I'm done rebuilding and restoring stuff and I'm trying to reduce my collection of machines to just a handful if I can. The last time I had this Princess up and running was 3 years ago...I had just replaced the old pstat with a new Sirai...
I have an older model Londinium lever I am considering selling for the right price, with my Monolith MC3 w/TiN burrs, and all accessories. I'm not desperate, so the price and arrangements will need to be right. No shipping, but I could deliver/ meet up in surrounding states for...
Selling my La Spaziale Vivaldi II Espresso Machine.
Original owner, purchased from Chris Coffee.
Perfect working order, has timer and updated pre-infusion board. Used daily, 2 - 4 shots/day. Plumbed in, always used with Chris Coffee water conditioner.
Asking $950, buyer pays...
Selling my Eagle One to try something else. It's been a great experience, but I always have an itch to try different things sooner or later and now is the time.
The machine was purchased in Feb 2021 and has been maintained in excellent condition. Has the latest firmware and...
I bought this Synch back in Feb. of this year. I've had it plumbed in and used Clive Coffee's water filtration system since then. I've decided that I don't make as many milk drinks as I thought I thought I might. Includes the upgraded flow control as well as ECM...
At the start of the pandemic, I disassembled my TEA to fully descale all components. I changed all the wiring with high temp silicone wires and rebuilt the E61 group. Shortly after I was given the opportunity to upgrade to a double boiler so the TEA was put in storage since.
It...
I moved to a smaller lever machine recently and it's finally time to send my Astra Gourmet to its next home. I've had this machine for a while and have maintained it extensively over the years (new heating element, seals, switches, pumps, computer, etc etc). Astra is a great US...
I'm selling a Pullman BigStep 58.5mm tamper with 2 handles : wenge wood + black stealth matte anodized. The tamper is like new, has been barely used and is sold in the original packaging with the original spacers. I would like to sell it in Europe.
To price this, I looked at...
For sale is a Baratza Sette 270. This one was a replacement for a launch Sette 270 in October of 2019. I got this one from Baratza sometime in 2020 and early 2022 I received a new motor and felt (goes into the burr adjustment mechanism) from Baratza that I installed. Everything...
Lightly used Reg Barber 58mm tamper
Green
Comes with original box
Couple very tiny chips on handle, but otherwise in very good condition
$40 shipped lower 48
Used and in a very good condition. If you are using any kind of temperature testing on your espresso machine, this is the ideal thermometer for the job. I used ut mostly with the Scace Device. Includes 2 Type K Thermocouples
HH506RA is a low cost, feature-packed, portable,...
Illy art collection 2000 Mimmo Paladino Espresso Cups. New and unused with original box and literature. Limited edition, each cup is signed and numbered by the artist.
Item includes:
6 espresso cups
6 saucers
1 original box
1 booklet
1 signed card
PRICE REDUCED: Now $100 Rancilio Rocky 50 mm flat burr grinder (buyer pays shipping), payment can be via PayPal for confirmed/verified address. Stepped grinder with 50 settings, grinds fine enough for espresso and coarse for French press. Never had an issue grinding fine enough...
I didn't buy the grinder to use this with, so I never used it. It came with Decent portafilter stand and Decent simple scale. Please note, I am ONLY selling the weighing doser stand alone (no scale or portafilter stand).
This is the Livia Bar sold as an accessory to the Pasquini Livia 90 back in the day. Still in good shape except for some faint water/salt splotches on the top. Too small for my current machine, but I was using it up through the start of 2020. Left drawer is a large knock-box,...
Selling my Gen1 burrs for the Ode. Saw a guy posting on here a while ago as he was building a grinder it seemed like. Posting in case anyone wants them. $20 shipped
I also have 64mm Italmill burrs I would consider selling for $40 shipped
Hello, I'm selling my Streitman CT2. I'm located in Seattle for local pickup. Continental US shipping only.
Wouter sent this unit to me in November 2020. At times, I've used this machine regularly as I experimented. It also has seen periods of nonuse. I would pull 2 or 3 shot...
Olympia Cremina Model 1967 with black cabinet manufactured in '76. Fully restored with silicone and teflon gaskets in July, and freshly descaled and lubed before listing. The broiler top and basket are all original and the unit is in over good shape. $2300, I'm located in Utah...
Selling my Rocket Mozzafiato V (PID, Timer) . The machine purchased in April 2020 and it has been meticulously cared for. It has been used to pull between 3-5 shots weekly by myself.
Will sell with everything included when purchased (single, double, naked ports, and tamper...
Since falling in love with LONDINIUM's R24 Lever espresso machine, I have gone off the deep end and purchased a more expensive lever machine, thinking that I could get an even better tasting shot! I was wrong....
Honestly, the quality of shot that I got from the LONDINIUM was...
I am selling a new set of SSP Multi Purpose Burrs for 64mm grinders (Super Jolly, DF64 etc). I had purchased 2 sets and only need 1. This set has never been used. Free shipping to US. $160
Looking to buy a Londinium LR, profitec pro 800, etc spring lever in the DFW area. In town for the week If anyone has one in good condition that they've been considering selling
Purchased new in 2016 and used almost daily. One minor repair by vendor (Whole Latte Love) in 2019. Working fine in 2020 but upgraded to ECM due to the pandemic and I have not used the G4 since then. Will ship in original packaging. Cups shown in photo not included. Asking $900....
DF64 grinder
Color : Carbon Black
Bought new in April 2021
Comes with a dial indicator all the accessories.
Comes with regular steel burrs
Local pickup in NYC (Brooklyn) preferred but I can ship an the buyer's expense.
Perfect condition, really good alignment, no issues.
$350...
Bought this kit from Chris Coffee a month ago, ended up upgrading to a machine with a flow control device so no longer need it. Asking for $150 plus shipping or local pickup in Minneapolis, MN.
Like new Fellow Ode grinder with upgraded SSP MP brew burrs. Purchased in April of this year. I've aligned the burrs and the grinder works great, but managed to snag a Lagom P64 and I don't have room for both. Preference for pick-up in the Boston area but willing to ship in...
Looking to sell my Niche. Purchased new in fall of 2020. Comes with all original accessories, box and packaging. used for 2-3 shots per day for about 1 year. Prefer local pickup in Boston area but willing to ship in lower 48 and and would pay shipping at asking price.
If I remember correctly I ordered this when I had a Cremina. That was a long time ago. And/but I never used it.
It's intended use was to put on the steam valve to test the pressure.
It's got a 1.5 dial with both PSI and Bar markers.
$35 shipped (not international)j
The forum has given me so much, I wanted to give something back.
I was commissioned by a winery to build a large table for their new VIP tasting room experience. The wood for that table was to come from trees on their properties that had been harvested.
The wood for the...
Lightly used LIDO ET, comes with nice travel bag, hex wrench, and brush. This model has finer adjustments so can grind for both espresso and brewed. Also has foldable handle.
I'm in San Dimas about 30-40min east of downtown Los Angeles. Work in Fontana which is 30 min east of...
Selling a used, but very well maintained Breville Oracle Touch. Original owner, purchased new towards the end of 2018. Upgrading to something a bit different. This has been a great machine and regularly maintained.
$799 OBO.
The machine has had a firmware bug since the day I...
I bought this grinder new in 2008. Put in storage for two years during home reno.
I've used it for 4 daily 16 gram shots since 2011. Home use only.
It still has the original burrs installed. I have given it a bit of a clean but you might want to do a little more.
The...