Would I regret buying the Profitec Pro 700 over the 500? - Page 5

Recommendations for espresso equipment buyers and upgraders.
BillF
Posts: 16
Joined: November 25th, 2017

Postby BillF » Jan 12, 2018, 2:25 pm

goalerjones wrote:If they use UPS to ship, there's always a chance they're gonna destroy the 500 before it even gets to you, so you wouldn't have to pay for shipping it back as a damage claim...happened to my first Vetrano. :D

Oh no, not them too! In early November I sent a $500 Predator Revo cue shaft to the authorized repair center via USPS, luckily insured, as I am now waiting for my settlement check as it never got there :(
BillF

User avatar
slipchuck
Posts: 600
Joined: April 12th, 2017

Postby slipchuck » replying to BillF » Jan 12, 2018, 2:28 pm

Pool shark?
The only bad decisions are the decisions you didn't make

Abecker
Posts: 74
Joined: December 17th, 2017

Postby Abecker » Jan 12, 2018, 8:01 pm

Did your 500 come in yet?

ben8jam
Posts: 520
Joined: January 6th, 2015

Postby ben8jam » Jan 12, 2018, 8:59 pm

Abecker wrote:Did your 500 come in yet?


Literally just arrived 10 minutes ago!

I decided to stick with the 500. I don't really have a great reason as to why, but feel like I will use the e61 group for a while to get my technique better, and then maybe one day I'll upgrade to a LMLM style machine.

Appreciate everyone's responses - very helpful.

smite wrote:Good call, you will not regret getting the 700. It is very forgiving great built machine that pulls amazing shots.

BillF wrote:I decided it was well worth the extra money for the consistency and convenience of the PID DB machine, plus the other features.


Where were you two last week? lol.

goalerjones
Posts: 155
Joined: March 31st, 2017

Postby goalerjones » Jan 12, 2018, 9:14 pm

you might want to pull off the back and do an inspection to make sure all the tubes, wires and fittings are connected properly. They can loosen during shipping and cause problems once ur up and running. We found that the Gicar had come loose as well as some of the connections. Plus it will get you used to taking it apart so you can be more familiar with the process when you need to make adjustments. WLL has walk thru videos on their site to show you how.

BillF
Posts: 16
Joined: November 25th, 2017

Postby BillF » Jan 13, 2018, 5:51 pm

slipchuck wrote:Pool shark?


:D oh how I wish
BillF